QQ: 859818709

ZBTK DIY-Complete Laser Galvo Scanner Kit, 10 mm Aperture, 1064 nm, XY2-100

ZBTK DIY-Complete Laser Galvo Scanner Kit, 10 mm Aperture, 1064 nm, XY2-100

Price on request
Category:

Description

Product Overview

The ZBTK DIY-Complete is a complete DIY laser scanning galvo kit from Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK). Aimed at makers and teaching laboratory work, it has a 10 mm clear aperture and uses the XY2-100 interface protocol, so it is compatible with mainstream laser controller cards and is an ideal entry point into laser scanning applications.

Key Features

⚡ High-Speed Scanning Performance

The product reaches a marking speed of 1.5 m/s and a positioning speed of 5 m/s, with a tracking error of only 0.30 ms. The optimised servo control algorithm guarantees smooth switching between high-speed jumps and low-speed marking, with short small-step response times, so high-quality marking is maintained even during high-speed jump marking.

🎯 High-Precision Positioning

Repeatability (RMS) is under 10 μrad and non-linearity under 1.0 mrad, with gain drift under 100 ppm/K, zero drift under 50 μrad/K and 8-hour drift under 0.3 mrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation keep positioning stability and process consistency excellent through long continuous operation.

🌡️ Ultra-Low Thermal Drift

Refined photoelectric sensor technology and an advanced automatic thermal-drift compensation algorithm overcome the temperature drift problem of galvo scanners. Zero temperature drift is only under 50 μrad/K, gain temperature drift under 100 ppm/K and 8-hour long-term drift under 0.3 mrad, which satisfies the stability requirements of the great majority of long-duration, high-volume marking and welding applications. Process quality stays consistent even when ambient temperature swings by ±10 °C.

🔧 High-Torque Permanent-Magnet Galvo Motor

High-torque permanent-magnet galvo motors are used, with high-energy-density permanent magnets in the rotor and low-friction precision bearings, giving a high torque constant and low rotor inertia. The motors deliver excellent dynamic response while maintaining scanning accuracy, and hold a stable output through long continuous operation.

📡 High-Precision Analog/Digital Servo Driver Board

A ZBTK high-performance servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage anti-interference protection array circuit, first-tier international brands for core components, and is burned in for 360 hours before shipment, so it stays reliable over the long term even in harsh electromagnetic environments.

🔌 Interface Compatibility

The product supports the XY2-100 standard communication protocol and is compatible with the great majority of laser controller cards on the market (JCZ EZCAD, SCANLAB RTC, RAYLASE SP-ICE and similar). It is plug and play, so system integration is quick and efficient. The supply requirement is ±15 V / 3 A, and the interface cable is shielded to suppress external electromagnetic interference.

❄️ Efficient Cooling

The unit is air cooled: optimised cooling fins and an efficient heat-conduction path keep the galvo stable over long runs within its rated power range. The compact housing balances thermal performance against space, so it integrates easily into many kinds of laser processing equipment.

🛡️ High-Reliability Design

ZBTK selects first-tier international brands for all core components, and every galvo is burned in for 360 hours before shipment, so it runs stably and reliably over the long term under extreme conditions. The design uses multi-stage, high-immunity protection array circuits and similar techniques for excellent interference immunity.

Detailed Specifications

Optical Parameters
Clear Aperture 10 mm
Scan Angle ±0.35 rad
Max Laser Power 50 W
Mirror Coating Wavelength 1064 nm
Scanning Parameters
Non-linearity under 1.0 mrad
Tracking Time 0.30 ms
Repeatability (RMS) under 10 μrad
Marking Speed under 1.5 m/s
Positioning Speed under 5 m/s
Gain Drift under 100 ppm/K
Zero Drift under 50 μrad/K
8-Hour Drift (after 30 min warm-up) under 0.3 mrad
Electrical Parameters
Power Supply ±15 V / 3 A
Input Signal Protocol XY2-100
Cooling Method Air cooling
Mechanical Parameters
Operating Temperature 25 ± 10 °C
Dimensions (L×W×H) 114 × 96 × 94 mm
Weight 1.8 kg (including accessories)

Operating Principle

A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors respectively, steering the incoming laser beam to any position on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-rotation servo motor: when the driver board feeds control current into the motor coils, electromagnetic torque drives the rotor and mirror to the commanded angle, while a position sensor (an analog position detector, APD, or a digital encoder) measures the rotor angle in real time and closes the servo loop against the command. Scan speed depends on the dynamic response of the motor, and the tracking time characterises how far the galvo lags the command signal, which makes it the key indicator of high-speed performance.

Applications

Laser Marking

Suited to text, graphics, QR codes and serial numbers on metal and non-metal surfaces, with high marking accuracy, high speed and durable results. Widely used in electronic components, hardware tools and medical devices.

Laser Welding

Used for precision welding such as lap welding of thin sheet and spot welding, with a small heat-affected zone and low distortion, which suits precision component assembly.

Laser Cutting

With a laser of appropriate power it performs precision cutting of thin metal and non-metal materials, with a narrow kerf, high speed and good edge quality.

3D Printing and Additive Manufacturing

Used for laser scanning in SLM and SLS metal additive manufacturing, precisely controlling laser energy distribution and scan path to secure the sintering quality of every layer.

Precision Micro-Processing

Suited to precision microstructure work in semiconductor, microelectronics and photonics applications, such as micro-hole drilling, micro-channel etching and thin-film patterning.

Laser Cleaning

With a high-power pulsed laser it selectively removes oxide layers, coatings and contamination from metal surfaces without damaging the substrate.

Research and Education

Suited to laser processing experiments in universities and research institutes, and a common item of laboratory equipment in optical engineering, materials science and advanced manufacturing.

Selection Guide

When choosing a scanning galvo, first set the clear aperture from the laser power: 8–10 mm for lasers under 100 W, 10–14 mm for 100–500 W, and 20–30 mm for lasers over 500 W. Then choose the galvo grade from the accuracy requirement: the economical 10C covers 90% of routine marking needs; the high-precision 14AW-III-Pro suits precision marking and welding; digital closed-loop models (the FB2 series) give the highest accuracy and long-term stability and suit 7×24 continuous production. Scan speed and dynamic performance depend on the application: marking is judged mainly on marking speed and writing speed, while welding is judged on welding speed and tracking error.

Series Comparison

Model Type Clear Aperture Main Feature Reference Price
2D8A1064-Base DIY galvo module 8 mm Customisable development On request
DIY-Complete DIY complete kit 10 mm Full accessory set included On request

About the Brand

Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK) is a leading Chinese manufacturer of laser galvo scanners with more than ten years of galvo development and production experience. Its range covers 2D scanning galvos, 3D dynamic-focus galvos, welding galvos and OCT galvo motors, and is widely used in laser marking, welding, cutting, 3D printing and medical aesthetics. ZBTK scanners are known for cost-effectiveness and stability, can replace comparable imported products, and enjoy a solid reputation in China’s laser industry.

Contact Us

For more product information, a quotation or technical advice, please contact us:

📞 Hotline: +86 159-2722-0467

We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.

Reviews

There are no reviews yet.

Be the first to review “ZBTK DIY-Complete Laser Galvo Scanner Kit, 10 mm Aperture, 1064 nm, XY2-100”

Your email address will not be published. Required fields are marked *

中文EN