QQ: 859818709

ZBTK Medical Aesthetic Galvo Scanner System, 10 mm Aperture, for Dermatology Laser Systems

ZBTK Medical Aesthetic Galvo Scanner System, 10 mm Aperture, for Dermatology Laser Systems

Price on request
Category:

Description

Product Overview

The ZBTK medical aesthetic galvo scanner system is a high-precision scan head from Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK), built for facial aesthetic laser equipment. The clear aperture is 10 mm with a ±0.30 rad scan angle, repeatability is under 1 μrad and non-linearity under 0.3 mrad, marking speed is under 1 m/s and positioning speed 4 m/s. It is used in laser marking, welding and cutting as well as in the beam-delivery section of aesthetic and dermatological laser treatment systems.

Key Features

⚡ High-Speed Scanning Performance

Marking speed reaches up to 1 m/s and positioning speed 4 m/s, with a tracking error of only 0.12 ms. The optimised servo control algorithm keeps the transition between high-speed jumps and low-speed marking smooth, and the short small-step response time preserves marking quality even during fast jump-and-mark cycles.

🎯 High-Precision Positioning

Repeatability (RMS) is under 1 μrad and non-linearity under 0.3 mrad, with gain drift under 20 ppm/K, zero drift under 10 μrad/K and 8-hour drift under 0.05 mrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation keep positioning stability and process consistency excellent through long continuous runs.

🌡️ Ultra-Low Thermal Drift

Refined photoelectric sensor technology and an advanced automatic thermal-drift compensation algorithm overcome the temperature drift problem of galvo scanners. Zero temperature drift is only under 10 μrad/K, gain temperature drift under 20 ppm/K and 8-hour long-term drift under 0.05 mrad, satisfying the stability requirements of most long-duration, high-volume marking and welding applications. Process quality stays consistent even when ambient temperature swings by ±10 °C.

🔧 High-Torque Permanent-Magnet Galvo Motor

A high-torque permanent-magnet galvo motor is used, with high-energy-density magnets in the rotor and low-friction precision bearings, giving a high torque constant and low rotor inertia. It delivers excellent dynamic response while maintaining scan accuracy, and holds a stable output through long continuous operation.

📡 High-Precision Analog/Digital Servo Driver Board

A ZBTK high-performance servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage anti-interference protection array circuit, first-tier international brands for core components, and is burned in for 360 hours before shipment, so it stays reliable over the long term even in harsh electromagnetic environments.

🔌 Interface Compatibility

The product supports the XY2-100 and analog protocols and works with most laser controller cards on the market (JCZ EZCAD, SCANLAB RTC, RAYLASE SP-ICE and similar). It is plug and play, so system integration is quick and clean. It runs from ±15 V / 3 A, and the shielded interface cable suppresses external electromagnetic interference.

❄️ Efficient Cooling

The unit is air cooled: optimised cooling fins and an efficient heat path keep the galvo stable over long runs within its rated power range. The compact housing balances thermal performance against space, so it integrates easily into many kinds of laser processing equipment.

🛡️ High-Reliability Design

ZBTK selects first-tier international brands for all core components, and every galvo is burned in for 360 hours before shipment, so it runs stably and reliably over the long term under extreme conditions. The design uses multi-stage, high-immunity protection array circuits and similar techniques for excellent interference immunity.

Detailed Specifications

Optical Parameters
Clear Aperture 10 mm
Scan Angle ±0.30 rad
Max Laser Power 50 W
Mirror Coating Wavelength 800–1350 nm
Scanning Parameters
Non-linearity under 0.3 mrad
Tracking Time 0.12 ms
Repeatability (RMS) under 1 μrad
Marking Speed under 1 m/s
Positioning Speed under 4 m/s
Gain Drift under 20 ppm/K
Zero Drift under 10 μrad/K
8-Hour Drift (after 30 min warm-up) under 0.05 mrad
Electrical Parameters
Power Supply ±15 V / 3 A
Input Signal Protocol XY2-100 / Analog
Cooling Method Air cooling
Mechanical Parameters
Operating Temperature 25±10 °C
Dimensions (L×W×H) 120 × 90 × 90 mm
Weight 1.8 kg

Operating Principle

A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X and Y mirrors, steering the incoming beam to any point on the work plane and so forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the coils, electromagnetic torque turns the rotor and mirror to the commanded angle, while a position sensor (an analog position detector, APD, or a digital encoder) reads the rotor angle in real time and closes the servo loop against the command. Scan speed depends on the dynamic response of the motor, and the tracking time expresses how far the galvo lags the command signal — a key figure for high-speed performance.

Applications

Laser Marking

For marking text, patterns, 2D codes and serial numbers on metal and non-metal surfaces with high accuracy, high speed and lasting contrast; widely used in electronic components, hardware tools and medical devices.

Laser Welding

Suited to precision welding such as lap welding of thin sheet and spot welding, with a small heat-affected zone and little distortion, which fits precision component assembly.

Laser Cutting

With a laser of suitable power it gives precise cutting of thin metal and non-metal materials, with a narrow kerf, high speed and clean edges.

3D Printing / Additive Manufacturing

Used for beam scanning in SLM and SLS metal additive manufacturing, where it controls energy distribution and scan path precisely to keep the quality of every sintered layer consistent.

Precision Micro-Machining

For fine micro-structure work in semiconductors, microelectronics and photonics, such as micro-via drilling, micro-channel etching and thin-film patterning.

Laser Cleaning

With a high-power pulsed laser it selectively removes oxide, coating and contamination from metal surfaces without damaging the substrate.

Research and Education

Suited to laser processing research in universities and institutes, and a common fixture in optical engineering, materials science and advanced manufacturing laboratories.

Selection Guide

When choosing a scan head, size the clear aperture from the laser power first: 8–10 mm below 100 W, 10–14 mm for 100–500 W and 20–30 mm above 500 W. Then pick the galvo grade from the accuracy requirement: the economical 10C covers about 90 % of routine marking work, the high-precision 14AW-III-Pro suits precision marking and welding, and digital closed-loop models (FB2 series) give the highest accuracy and long-term stability for 7×24 production. Scan speed and dynamic performance follow the task: for marking the key figures are marking speed and writing speed, for welding they are welding speed and tracking error.

Series Comparison

Model Type Clear Aperture Main Feature Reference Price
Medical-Beauty Aesthetic galvo 10 mm Dedicated to facial treatment On request

About the Brand

Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK) is a leading Chinese manufacturer of laser galvo scanners with more than ten years of galvo development and production experience. Its range covers 2D scanning galvos, 3D dynamic-focus galvos, welding galvos and OCT galvo motors, and is widely used in laser marking, welding, cutting, 3D printing and medical aesthetics. ZBTK scanners are known for cost-effectiveness and stability, can replace comparable imported products, and enjoy a solid reputation in China’s laser industry.

Contact Us

For more product information, a quotation or technical advice, please contact us:

📞 Hotline: +86 159-2722-0467

🌐 Website: www.soar-laser.cn

We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.

Reviews

There are no reviews yet.

Be the first to review “ZBTK Medical Aesthetic Galvo Scanner System, 10 mm Aperture, for Dermatology Laser Systems”

Your email address will not be published. Required fields are marked *

中文EN