Description
Product Overview
The ZBTK OCT galvo motor is a medical-imaging galvanometer motor from Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK). It is a 5 mm galvo motor module designed for medical imaging, with repeatability under 1 μrad and a tracking time of 0.08 ms, and it can be bought on its own for galvo repair and replacement or for in-house system integration.
Key Features
⚡ Fast Response Performance
The tracking time of this galvo motor is only 0.08 ms, with excellent small-step response, which meets the strict high-speed scanning requirements of medical imaging. The rotor uses a low-inertia design and, together with a high-bandwidth servo driver, achieves millisecond-level positioning response and stable, precise deflection control during high-frequency reciprocating scans.
🎯 High-Precision Positioning
Repeatability (RMS) is under 1 μrad and non-linearity under 0.3 mrad, with gain drift under 20 ppm/K, zero drift under 10 μrad/K and 8-hour drift under 0.05 mrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation keep positioning stability and process consistency excellent through long continuous runs.
🌡️ Ultra-Low Thermal Drift
Refined photoelectric sensor technology and an advanced automatic thermal-drift compensation algorithm overcome the temperature drift problem of galvo scanners. Zero temperature drift is only under 10 μrad/K, gain temperature drift under 20 ppm/K and 8-hour long-term drift under 0.05 mrad, satisfying the stability requirements of most long-duration, high-volume marking and welding applications. Process quality stays consistent even when ambient temperature swings by ±10 °C.
🔧 Quality Galvo Motor
The motor uses a high-quality permanent-magnet rotor and precision bearings, giving low rotor inertia and a high torque constant. With an optimised electromagnetic design it delivers excellent dynamic response while maintaining scan accuracy. Motor life exceeds 20000 hours with no degradation in long-term operation, and the motor can be used independently for galvo system repair and replacement or for in-house system integration and development.
📡 High-Precision Analog/Digital Servo Driver Board
A ZBTK high-performance servo driver board provides a high-speed PWM output stage and precise position detection. The board uses a multi-stage anti-interference protection array circuit, first-tier international brands for core components, and is burned in for 360 hours before shipment, so it stays reliable over the long term even in harsh electromagnetic environments.
🔌 Interface Compatibility
The product supports analog and custom protocols and works with most laser controller cards on the market (JCZ EZCAD, SCANLAB RTC, RAYLASE SP-ICE and similar). It is plug and play, so system integration is quick and clean. It runs from ±15 V / 2 A, and the shielded interface cable suppresses external electromagnetic interference.
❄️ Efficient Cooling
The unit is air cooled: optimised cooling fins and an efficient heat path keep the galvo stable over long runs within its rated power range. The compact housing balances thermal performance against space, so it integrates easily into many kinds of laser processing equipment.
🛡️ High-Reliability Design
ZBTK selects first-tier international brands for all core components, and every galvo is burned in for 360 hours before shipment, so it runs stably and reliably over the long term under extreme conditions. The design uses multi-stage, high-immunity protection array circuits and similar techniques for excellent interference immunity.
Detailed Specifications
| Optical Parameters | |
|---|---|
| Clear Aperture | 5 mm |
| Scan Angle | ±0.25 rad |
| Max Laser Power | N/A |
| Mirror Coating Wavelength | 800–1350 nm |
| Scanning Parameters | |
|---|---|
| Non-linearity | under 0.3 mrad |
| Tracking Time | 0.08 ms |
| Repeatability (RMS) | under 1 μrad |
| Marking Speed | N/A |
| Positioning Speed | N/A |
| Gain Drift | under 20 ppm/K |
| Zero Drift | under 10 μrad/K |
| 8-Hour Drift (after 30 min warm-up) | under 0.05 mrad |
| Electrical Parameters | |
|---|---|
| Power Supply | ±15 V / 2 A |
| Input Signal Protocol | Analog / Custom |
| Cooling Method | Air cooling |
| Mechanical Parameters | |
|---|---|
| Operating Temperature | 25±10 °C |
| Dimensions (L×W×H) | 50 × 50 × 45 mm (per axis) |
| Weight | 0.25 kg (per axis) |
Operating Principle
A galvo motor is the core actuator of a laser scanning system and works on the principle of electromagnetic torque drive. When the driver board feeds current into the galvo motor, the magnetic field of the stator coil interacts with the rotor’s permanent magnets to produce electromagnetic torque, which drives the rotor and the mirror rigidly attached to it. The deflection angle of the rotor is proportional to the input current, so precise control of the input current gives precise control of the beam deflection direction. A high-stiffness torsion spring or elastic element provides the restoring torque, and a position sensor (an analog position detector or a digital encoder) closes the servo loop for fast, accurate angular positioning. Dynamic performance is set by rotor inertia, torque constant and servo bandwidth: a low-inertia, high-torque motor responds faster and scans at a higher frequency.
Applications
Galvo Repair and Replacement
As the core component of a galvo scanner, the motor can directly replace the original galvo motor to restore normal operation, with low repair cost and short lead time.
OCT Medical Imaging
OCT galvo motors are designed specifically for optical coherence tomography, where ultra-low inertia and high-frequency response secure the frame rate and resolution of real-time imaging.
Custom System Integration
The motor can be purchased separately for building your own laser scanning system; combined with a general-purpose servo driver board and optical components it enables customised laser processing solutions.
Research and Laboratory
Suited to laser scanning research in universities and institutes, with flexible configuration and adjustable parameters that make it an ideal choice for optical experiment platforms.
High-Speed Scanning
High-speed galvo motors suit scanning applications that need high dynamic response, such as barcode scanning and rapid prototyping.
Spectroscopy
Used with a spectrometer for fast wavelength scanning and spectral data acquisition in material composition analysis and in-line inspection.
LiDAR
Used in the scanning module of automotive and airborne LiDAR, where high accuracy and high reliability meet the strict demands of autonomous driving and mapping.
Selection Guide
Choose the motor specification from the application: a 5 mm OCT-dedicated motor for OCT medical imaging, an 8–10 mm motor for high-speed marking, and a 9.5 mm or larger motor where high precision is required. Watch the matching between motor and driver board, and the compatibility between shaft diameter and mirror mount. If you are building your own system, we recommend buying the matching servo driver board and optical components at the same time.
Series Comparison
| Model | Type | Clear Aperture | Main Feature | Reference Price |
|---|---|---|---|---|
| DIY galvo motor | Maker motor | 8 mm | Cost-effective | On request |
| OCT galvo motor | Medical motor | 5 mm | Ultra-fast response | On request |
| MT1026 | 9.5 mm high-speed motor | 9.5 mm | Precise control | On request |
About the Brand
Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK) is a leading Chinese manufacturer of laser galvo scanners with more than ten years of galvo development and production experience. Its range covers 2D scanning galvos, 3D dynamic-focus galvos, welding galvos and OCT galvo motors, and is widely used in laser marking, welding, cutting, 3D printing and medical aesthetics. ZBTK scanners are known for cost-effectiveness and stability, can replace comparable imported products, and enjoy a solid reputation in China’s laser industry.
Contact Us
For more product information, a quotation or technical advice, please contact us:
📞 Hotline: +86 159-2722-0467
🌐 Website: www.soar-laser.cn
We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.





Reviews
There are no reviews yet.