Description
Product Overview
The SW3000S is a representative model in ZBTK’s integrated-driver wobble welding head family: the welding head and the wobble drive are integrated in one unit, so no external wobble control box is needed, and the QBH fiber interface connects directly to fiber lasers up to 3000 W. Focusing lenses are selectable from F200 to F300, weld width is 5 mm (10 mm customizable), wobble frequency reaches up to 1000 Hz, and 8 wobble patterns including dot, line, circle and figure-eight are supported. Positioning accuracy is 0.01 mm and a coaxial CCD camera is built in. The head weighs approximately 3 kg and operates from 15 to 35 °C, making it a mainstay for handheld and automated welding.
Key Features
- Integrated driver and controller: wobble drive built in, no external control box required
- 8 wobble patterns: dot, line, circle, figure-eight and more, selected by process
- 5 mm weld width, customizable: 5 mm as standard, 10 mm available on special request
- Coaxial CCD viewing: intuitive seam alignment
- 0.01 mm accuracy: high positioning and wobble accuracy
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | ZBTK |
| Model | SW3000S |
| Type | Wobble welding head with integrated driver and controller |
| Fiber Interface | QBH |
| Power | up to 3000 W |
| Wavelength | 1030-1090 nm |
| Collimating Focal Length | F75-F150 |
| Focusing Focal Length | F200-F300 |
| Weld Width | 5 mm (10 mm customizable) |
| Wobble Frequency | up to 1000 Hz |
| Wobble Patterns | 8 |
| Positioning Accuracy | 0.01 mm |
| CCD | Built-in coaxial |
| Weight | approx. 3 kg |
| Operating Temperature | +15~35 °C |
Applications
Handheld laser welding, automated welding platforms, stainless steel doors and windows, and kitchen and sanitary sheet-metal welding. The head also suits comparable processes under similar working conditions; non-standard customization and batch solutions are available, and drawings or process requirements can be submitted for a detailed evaluation.
Selection Guide
- Select the welding head with headroom above the upper power limit of the laser. Weld bead width is directly related to the focusing lens focal length; special weld widths require a customized lens group, and weld requirements can be submitted for evaluation.
- Protective windows are consumables; buy spares together with the machine and keep them in stock. Contaminated windows cause power loss, wider beads and a higher porosity rate.
- Models in the same series differ in power, clear aperture, interface and function modules. For batch purchasing or production-line projects, sample trials and solution evaluations can be requested.
- The product is genuine factory-original stock and ships with a packing list and warranty certificate; warranty and spare-part support are provided from the date of receipt as agreed, excluding wear parts such as lenses and seals.
- This item is the ZBTK SW3000S 3000 W laser wobble welding head with integrated driver and controller; key specifications are listed in the table above. For higher power, a larger aperture or a different interface or focal length, contact us for a series comparison and a quote.
Usage Precautions
- Never look directly into the laser beam or specular reflections while the equipment is running. Mark the work area with warning signs, install protective shielding and wear safety goggles rated for the wavelength in use.
- Use purified or deionized water in the water-cooling circuit and replace it regularly. If water temperature or flow alarms are triggered, stop the machine, find the cause and only then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician with lockout/tagout applied. The equipment must be reliably grounded to prevent leakage and interference.
- Protect the equipment from moisture and dust during transport and storage. Before long-term shutdown, drain the water circuit, disconnect power and cover the unit against dust.
- When replacing the protective window inside the lens barrel, make sure the O-ring is pressed down properly; abnormal gas-circuit pressure will accelerate window contamination.
- On receipt, check the model nameplate against the accessory list. If problems arise during installation or commissioning, contact Soar Laser technical support (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
What does “integrated driver and controller” mean?
The wobble galvo drive and the welding control are integrated into the gun body, so the head works once the laser and power supply are connected, with fewer external control boxes and cables.
Can the weld width reach 10 mm?
The standard width is 5 mm; it can be extended to 10 mm by increasing the wobble amplitude and using a customized lens group. Please state this when ordering.
Which lasers does it work with?
Fiber lasers with a QBH interface at 1030-1090 nm (Raycus, Maxphotonics, JPT and similar) up to 3000 W.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual item, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change between batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.
Selection support: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, e-mail 859818709@qq.com.








Reviews
There are no reviews yet.