Description
Product Overview
The SW3000S-PRO is the enhanced version of the SW3000S: a welding head rated up to 3000 W with an integrated driver and control unit, 7 wobble patterns covering more seam processes, a DB25 interface for expanded control signals and a total weight of about 3.5 kg. The PRO version is richer in patterns, interfaces and process parameter management than the standard head, which suits handheld and automated work where welding process variety matters.
Key Features
- PRO enhancement: more patterns and interface functions than the standard version
- 7 wobble patterns: more process options per seam
- DB25 interface: convenient expansion of control signals
- Integrated driver: high integration, fast deployment
- About 3.5 kg: light enough for handheld welding
Technical Specifications
| Brand | ZBTK |
| Model | SW3000S-PRO |
| Laser power | up to 3000 W |
| Interface | QBH |
| Wobble patterns | 7 |
| Control interface | DB25 |
| Weight | approx. 3.5 kg |
| Type | Integrated driver and control |
Applications
Handheld welding, automated welding and multi-process seam work. Similar processes with a comparable duty cycle are also supported, and customised or batch solutions can be discussed: send drawings or process requirements for a detailed evaluation.
Selection Guide
- Size the welding head against the upper power limit of the laser and keep a margin. Weld spot width is directly linked to the focusing lens focal length, and unusual weld widths need a customised lens group; send your seam requirements for an evaluation.
- Protective windows are consumables, so buy spare windows together with the machine and keep them in stock. Contaminated optics cause power loss, wider seams and a higher porosity rate.
- Models in the series differ in power, clear aperture, interface and functional modules. For batch purchasing or line integration you can request a sample trial and a solution assessment.
- This is genuine factory stock and ships with a packing list and warranty certificate. Warranty and spare part support are provided from the date of receipt as agreed, excluding wear parts such as lenses and seals.
- This item is the ZBTK SW3000S-PRO 3000 W wobble laser welding head, PRO version with integrated driver; key specifications are listed in the table above. For higher power, a larger aperture or a different interface or focal length, contact us for a series comparison and a quotation.
Usage Precautions
- Never look directly into the beam or specular reflections while the laser is running. Mark the work area with warning signs and screening, and wear protective glasses matched to the wavelength.
- Use purified or deionised water in the cooling circuit and replace it regularly. If water temperature or flow alarms, stop the machine and investigate before restarting.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lockout and tagout applied before work. The machine must be reliably earthed to prevent leakage and interference.
- Protect the unit from moisture and dust during transport and storage. Before long-term shutdown, drain the water circuit, disconnect power and cover the unit against dust.
- When replacing the protective window inside the barrel, make sure the sealing ring is pressed down properly; a loss of gas pressure accelerates window contamination.
- On receipt, check the model nameplate against the accessory list. If you meet any problem during installation or commissioning, contact Soar Laser technical support (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
PRO or standard SW3000S?
Choose the PRO when you need many process types and DB25 expansion; for routine handheld welding the standard version is sufficient.
Which 7 patterns are included?
Spot, straight line, circle, figure-8 and other common wobble patterns; the exact list depends on the software.
Can it weld aluminium?
Yes. Aluminium is highly reflective, so adjust the parameters and make sure shielding gas coverage is adequate.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual unit, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change between batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.
Selection enquiries: Soar Laser (Changsha), hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.








Reviews
There are no reviews yet.