Description
Product Overview
The WD120 is a 12000 W hard optical path (direct beam) welding head from ZBTK, built for ten-kilowatt-class industrial welding. Instead of a fibre output section, a rigid mirror assembly carries the extreme power density, so the head runs stably at full power over long shifts. A QBH input couples to 12000 W fibre lasers, and large-aperture water-cooled optics deliver deep-penetration welding of thick plate and heavy structural parts. System integration, cooling water capacity and shielding gas supply all need to be sized accordingly, which makes it a fit for heavy applications such as shipbuilding and steel structures.
Key Features
- 12000 W ultra-high power: deep-penetration welding of ten-kilowatt-class thick plate
- Hard optical path: rigid mirror assembly rated for high power density
- QBH interface: couples to ten-kilowatt fibre lasers
- Industrial reliability: stable long runs at full power
- Heavy-industry ready: shipbuilding, steel structures, large tanks
Technical Specifications
| Brand | ZBTK |
| Model | WD120 |
| Type | Hard optical path welding head (direct beam) |
| Laser power | 12000 W |
| Interface | QBH |
| Structure | Hard optical path, no fibre output section |
| Cooling | Water cooling |
Applications
Deep-penetration welding of ten-kilowatt-class thick plate, shipbuilding, steel structures and large tank fabrication. Similar processes with a comparable duty cycle are also supported, and customised or batch solutions can be discussed: send drawings or process requirements for a detailed evaluation.
Selection Guide
- Size the welding head against the upper power limit of the laser and keep a margin. Weld spot width is directly linked to the focusing lens focal length, and unusual weld widths need a customised lens group; send your seam requirements for an evaluation.
- Protective windows are consumables, so buy spare windows together with the machine and keep them in stock. Contaminated optics cause power loss, wider seams and a higher porosity rate.
- Models in the series differ in power, clear aperture, interface and functional modules. For batch purchasing or line integration you can request a sample trial and a solution assessment.
- This is genuine factory stock and ships with a packing list and warranty certificate. Warranty and spare part support are provided from the date of receipt as agreed, excluding wear parts such as lenses and seals.
- This item is the ZBTK WD120 12000 W hard optical path welding head for ultra-high-power industrial use; key specifications are listed in the table above. For higher power, a larger aperture or a different interface or focal length, contact us for a series comparison and a quotation.
Usage Precautions
- Never look directly into the beam or specular reflections while the laser is running. Mark the work area with warning signs and screening, and wear protective glasses matched to the wavelength.
- Use purified or deionised water in the cooling circuit and replace it regularly. If water temperature or flow alarms, stop the machine and investigate before restarting.
- Electrical wiring and servicing must be carried out by a licensed electrician, with lockout and tagout applied before work. The machine must be reliably earthed to prevent leakage and interference.
- Protect the unit from moisture and dust during transport and storage. Before long-term shutdown, drain the water circuit, disconnect power and cover the unit against dust.
- When replacing the protective window inside the barrel, make sure the sealing ring is pressed down properly; a loss of gas pressure accelerates window contamination.
- On receipt, check the model nameplate against the accessory list. If you meet any problem during installation or commissioning, contact Soar Laser technical support (hotline +86 159-2722-0467) for remote or on-site assistance.
FAQ
What does ten-kilowatt welding require from the rest of the system?
A matching ten-kilowatt laser, ample cooling water and a full shielding gas supply are needed, and the optical path should be cleaned and the optics inspected more frequently.
How does it compare with a wobble head?
The WD series uses a hard optical path with a fixed spot and targets maximum penetration efficiency; choose a wobble series when you need a wide seam with low heat input.
Who provides the thick-plate welding parameters?
We can give baseline parameters based on laser power and plate thickness; final values are established by tuning on trial plates.
Disclaimer
The specifications on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual unit, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change between batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.
Selection enquiries: Soar Laser (Changsha), hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.








Reviews
There are no reviews yet.