QQ: 859818709

ZBTK WD60-PRO 6000 W Hard Optical Path Laser Welding Head, PRO Edition, QBH

ZBTK WD60-PRO 6000 W Hard Optical Path Laser Welding Head, PRO Edition, QBH

Price on request
Category:

Description

Product Overview

The WD60-PRO is the PRO edition of the ZBTK 6000 W hard optical path welding head: a reinforced mirror assembly and upgraded cooling design keep output stable and reliable through long continuous runs at 6000 W. With a QBH input, high structural rigidity and a steady weld spot, it is built for high-volume medium-to-thick plate welding on automated production lines.

Key Features

  • 6000 W high power: the workhorse for medium-to-thick plate welding
  • PRO reinforcement: strengthened mirror assembly and cooling for longer service life
  • Stable hard optical path: weld spot position stays consistent
  • QBH interface: direct connection to mainstream fibre lasers
  • Continuous operation: production-line friendly cycle times

Technical Specifications

Brand ZBTK
Model WD60-PRO
Type Hard optical path welding head, PRO edition
Power 6000 W
Interface QBH
Structure Hard optical path

Applications

Automated welding of medium and thick plate, high-volume production line welding and structural component fabrication. The head also suits similar processes under comparable working conditions; custom and volume solutions are available — send drawings or process requirements for a detailed assessment.

Selection Guide

  • Size the welding head with headroom above the maximum output power of the laser. Weld spot width is directly related to the focal length of the focusing lens; non-standard weld widths require a custom lens assembly — send us your seam requirements for evaluation.
  • Protective lenses are consumables. Buy spare lenses together with the machine and keep them in stock; contaminated lenses cause power loss, wider seams and higher porosity.
  • Models in the same series differ in power, clear aperture, interface and functional modules. For volume purchases or production line integration you can request a sample trial and a solution assessment.
  • This is genuine factory stock and ships with a packing list and warranty certificate. Warranty and spare part support are provided from the date of receipt as agreed, excluding wear parts such as lenses and seals.
  • This model is the ZBTK WD60-PRO 6000 W hard optical path welding head, PRO edition, built for high-power stability — key specifications are listed in the table above. For higher power, larger aperture, or a different interface or focal length, contact us for a series comparison and a quotation.

Usage Precautions

  • Never look directly into the beam or specular reflections while the laser is running. Mark the work area with warning signs and protective screens, and have personnel wear protective eyewear matched to the wavelength.
  • Use purified or deionised water in the cooling system and change it regularly. If water temperature or flow alarms, stop the machine and troubleshoot before restarting.
  • Electrical wiring and servicing must be carried out by a licensed electrician. Lock out and tag out before any work, and make sure the equipment is reliably earthed to prevent electric shock and interference.
  • Protect the equipment from moisture and dust during transport and storage. Before a long idle period, drain the water circuit, disconnect power and cover the unit against dust.
  • When replacing the protective lens inside the lens barrel, make sure the seal ring is properly compressed; abnormal gas circuit pressure will accelerate lens contamination.
  • On arrival, first check the model nameplate against the accessory packing list. If you run into problems during installation or commissioning, contact Soar Laser (Changsha) technical support (hotline +86 159-2722-0467) for remote or on-site assistance.

FAQ

What is the difference between the PRO edition and the standard WD60?
The PRO edition reinforces mirror assembly load capacity, cooling and reliability, so it suits long high-load production shifts; the standard version covers general duty.

How large is the weld spot?
It depends on the focusing configuration. Give us the laser power and plate thickness and we will recommend a focusing solution.

Can it weld thick stainless steel?
Yes. 6 kW performs well in deep-penetration welding of medium-to-thick stainless steel; parameters are optimised on test plates.

Disclaimer

Specifications on this page are compiled from the manufacturer’s public information and existing documentation and are for selection reference only. Product specifications are subject to the actual unit, the factory inspection report and the manufacturer’s latest datasheet; appearance and configuration may change between batches, so please confirm with us before ordering. Reproduction of the content of this page is prohibited without written permission.

Selection enquiries: Soar Laser (Changsha), hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.

Reviews

There are no reviews yet.

Be the first to review “ZBTK WD60-PRO 6000 W Hard Optical Path Laser Welding Head, PRO Edition, QBH”

Your email address will not be published. Required fields are marked *

中文EN