Description
Product Overview
The ZBTK ZB3D-12D 1064 nm R-type 3D galvo scanner is an R-type three-dimensional scanning galvo from Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK). The clear aperture is 12 mm and the unit uses a post-objective 3D scanning layout with a built-in Z-axis dynamic focusing module, so flat and curved surfaces can be processed precisely under XYZ three-axis coordinated control. Maximum laser power is 200 W, scan angle ±0.35 rad and repeatability under 3 μrad, which suits precision laser processing of large-format and curved workpieces.
Key Features
⚡ High-Speed Scanning Performance
Marking speed reaches up to 2 m/s and positioning speed 8 m/s, with a tracking error of only 0.22 ms. The optimised servo control algorithm guarantees smooth switching between high-speed jumps and low-speed marking, and the short small-step response time keeps marking quality high even during fast jump-and-mark cycles.
🎯 High-Precision Positioning
Repeatability (RMS) is under 3 μrad and non-linearity under 0.5 mrad, with gain drift under 60 ppm/K, zero drift under 30 μrad/K and 8-hour drift under 0.1 mrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation keep positioning stability and process consistency excellent during long, uninterrupted operation.
🌡️ Ultra-Low Thermal Drift
Fine photoelectric sensor technology and an advanced automatic thermal-drift compensation algorithm effectively overcome the thermal drift of the scanner. Zero-point thermal drift is only under 30 μrad/K, gain thermal drift under 60 ppm/K and 8-hour long-term drift under 0.1 mrad, which meets the stability requirements of most long, high-volume marking and welding applications. Process consistency is maintained even with ambient temperature swings of ±10 °C.
🔧 High-Torque Permanent-Magnet Galvo Motor
A high-torque permanent-magnet galvo motor is used, with a high-energy-density permanent magnet rotor and low-friction precision bearings, giving a high torque constant and low rotor inertia. The motor delivers excellent dynamic response while maintaining scan accuracy, and holds a stable output over long continuous runs.
📡 High-Precision Analog/Digital Servo Driver Board
The ZBTK high-performance servo driver board provides a high-speed PWM output stage and precision position detection. It uses multi-stage anti-interference protection array circuits, core components from first-tier international brands, and every unit is subjected to 360 hours of extended burn-in before shipment, so it runs reliably over the long term even in harsh electromagnetic environments.
🔌 Interface Compatibility
The scanner supports the XY2-100 standard communication protocol and is compatible with most laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series), for plug-and-play use and efficient system integration. Power supply: ±15 V / 10 A; shielded interface cables effectively suppress external electromagnetic interference.
❄️ Efficient Cooling
This product is air cooled. Optimised cooling fins combined with an efficient heat-conduction path keep the scanner stable over long runs within its rated power range. The compact body balances thermal performance and space efficiency, which makes integration into a wide range of laser processing machines straightforward.
🛡️ High-Reliability Design
ZBTK selects first-tier international brands for all core components, and every scanner is subjected to 360 hours of extended burn-in before shipment so that it runs stably and reliably under extreme conditions. The design uses multi-stage high-immunity protection array circuits for excellent interference resistance.
Detailed Specifications
| Optical Parameters | |
|---|---|
| Clear Aperture | 12 mm |
| Scan Angle | ±0.35 rad |
| Max Laser Power | 200 W |
| Mirror Reflection Wavelength | 1064 nm |
| Scanning Parameters | |
|---|---|
| Non-linearity | under 0.5 mrad |
| Tracking Time | 0.22 ms |
| Repeatability (RMS) | under 3 μrad |
| Marking Speed | under 2 m/s |
| Positioning Speed | under 8 m/s |
| Gain Drift | under 60 ppm/K |
| Zero Drift | under 30 μrad/K |
| 8-Hour Drift (after 30-min warm-up) | under 0.1 mrad |
| Electrical Parameters | |
|---|---|
| Power Supply | ±15 V / 10 A |
| Input Signal Protocol | XY2-100 |
| Cooling | Air cooled |
| Mechanical Parameters | |
|---|---|
| Operating Temperature | 25 ± 10 °C |
| Dimensions (L × W × H) | 220 × 100 × 100 mm |
| Weight | 3.5 kg |
Operating Principle
A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors independently, steering the incoming laser beam to any point on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the motor coil, electromagnetic torque drives the rotor and mirror to the commanded angle, while a position sensor (analog position detector, APD, or digital encoder) measures the rotor angle in real time and closes the servo loop against the commanded position. A 3D galvo scanner adds a Z-axis dynamic focusing module to the 2D scanner: by moving a variable-focus lens (meniscus lens) back and forth, the focal length is adjusted so that the laser focus can be shifted freely along the Z axis, giving precise focusing at any point in three-dimensional space. In a pre-objective 3D scanner the Z axis sits ahead of the XY mirror pair, so the beam is focused first and then deflected by the XY mirrors, which allows a larger working field and curved-surface processing. In a post-objective 3D scanner the Z axis sits after the XY mirror pair, so the beam is deflected first and then focused by the Z axis, which gives a more compact layout that suits small-field, high-precision 3D processing. Scan speed depends on the dynamic response of the motor, and tracking time (tracking error) characterises how far the scanner lags the command signal, which makes it the key metric for high-speed performance.
Applications
3D Curved Surface Processing
Suitable for laser marking and precision processing of three-dimensional curved workpieces such as automotive interior parts, 3D phone glass covers and curved appliance panels; Z-axis dynamic focusing keeps the spot uniform across the whole curved surface.
Large-Format Processing
Z-axis compensation enables very large working fields (up to 600 × 600 mm and above), breaking the field limit of a conventional 2D galvo plus f-theta lens, and suits full-surface processing of large workpieces.
Laser Deep Engraving
A pre-objective 3D scanner is clearly advantageous in deep engraving: the Z axis follows the engraving depth in real time and repositions the focus, so quality stays consistent at every depth level.
Laser Cutting
With Z-axis dynamic focusing, high-quality cutting is achieved on materials of different thickness, with a uniform kerf and little dross, which suits precision cutting applications.
3D Printing
Used for laser scanning in metal additive manufacturing (SLM/SLS); the Z axis precisely controls powder layer thickness and focus position so that every sintered layer is consistent.
Laser Marking
Adds curved-surface and height-variation marking to flat marking, meeting the marking needs of irregular and stepped parts and processing several faces in a single clamping.
Precision Micro-Processing
The 3D galvo scanner suits high-precision microstructure processing, such as three-dimensional micromachining of microfluidic chips, biosensors and photonic crystals.
Selection Guide
When choosing a 3D galvo scanner, first define the process type. A post-objective 3D scanner is compact and suits small-field, high-precision 3D processing such as deep engraving and precision 3D marking; a pre-objective 3D scanner delivers a larger working field and curved-surface processing and suits large-format and irregular workpieces. Aperture depends on laser power and working field: choose 14-20 mm for low-power UV processing, 20-30 mm for medium- and high-power fiber lasers, and 40 mm or more for high-power CO₂ processing. The wavelength must match the laser: UV 355 nm suits precision micro-processing, 1064 nm fiber lasers cover the widest range of uses, and 10600 nm is used for CO₂ laser processing.
Series Comparison
| Model | Clear Aperture | Wavelength | Focusing | Marking Speed | Repeatability | Max Power | Reference Price |
|---|---|---|---|---|---|---|---|
| 3D14C (355 nm) | 14 mm | 355 nm | Post-objective | under 1.5 m/s | under 3 μrad | 30 W | On request |
| 3D20C (355 nm) | 20 mm | 355 nm | Post-objective | under 2 m/s | under 4 μrad | 30 W | On request |
| 3D20C (1064 nm-F) | 20 mm | 1064 nm | Pre-objective | under 2 m/s | under 4 μrad | 500 W | On request |
| ZB3D-12D (1064 nm-R) | 12 mm | 1064 nm | Post-objective | under 2 m/s | under 3 μrad | 200 W | On request |
| 3D30A (930 nm) | 30 mm | 930 nm | Post-objective | under 3 m/s | under 5 μrad | 3000 W | On request |
| GD3D-1064-14A | 14 mm | 1064 nm | Pre-objective | under 2 m/s | under 3 μrad | 500 W | On request |
| ZB3D14A1064 | 14 mm | 1064 nm | Pre-objective (curved surface) | under 2 m/s | under 3 μrad | 500 W | On request |
| 3D40AD10600FF-H | 40 mm | 10600 nm | Pre-objective | under 2 m/s | under 8 μrad | 1000 W | On request |
| ZB3D30GH | 30 mm | 1030~1090 nm | 3D flying welding | under 3 m/s | under 5 μrad | 3000 W | On request |
About the Brand
Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK) is a leading Chinese manufacturer of laser galvo scanners with more than ten years of galvo development and production experience. Its range covers 2D scanning galvos, 3D dynamic-focus galvos, welding galvos and OCT galvo motors, and the products are widely used in laser marking, welding, cutting, 3D printing and medical aesthetics. ZBTK scanners are known for cost-effectiveness and stability, can replace comparable imported products, and enjoy a solid reputation in China’s laser industry.
Contact Us
For more product information, a quotation or technical advice, please contact us:
📞 Hotline: +86 159-2722-0467
🌐 Website: www.soar-laser.cn
We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.





Reviews
There are no reviews yet.