Polarisation state calculation
Three equivalent descriptions can be switched and interconverted freely: (1) Jones vector (amplitude + phase); (2) Stokes vector (S0–S3, supporting partial polarisation); (3) polarisation ellipse (azimuth ψ + axial ratio b/a + handedness).
When the axial ratio b/a = 0 the light is linearly polarised and is treated as such regardless of the handedness selected.
Core formulae and principles
Stokes vector
Degree of polarisation DoP
Azimuth ψ and ellipticity angle χ
Jones vector ↔ ellipse parameters
Axial ratio and handedness
Poincaré sphere
How to tell which convention your reference uses:Check what it calls (1, i)/√2 — if it calls this ‘left-hand LCP’, it agrees with this tool (optics convention); if it calls it ‘right-hand RCP’, it uses the engineering / IEEE convention and reversing the sign of S3 makes it agree with this tool.
Frequently asked questions (FAQ)
What is the state of polarisation of light?
Polarisation describes the way the electric-field vector of a light wave oscillates in the plane perpendicular to the direction of propagation. According to the trajectory traced by the tip of the electric-field vector, it can be classified as linear (straight line), circular (circle), elliptical (ellipse), or partially polarised light formed by mixing polarised and natural light. Fully polarised light is uniquely determined by two geometrical parameters, the azimuth ψ (direction of the major axis) and the ellipticity angle χ (shape of the ellipse and handedness), disregarding intensity and overall phase.
What is the difference between a Jones vector and a Stokes vector?
A Jones vector describes fully polarised light with a two-dimensional complex vector (Ex, Ey)^T; it captures phase relationships and makes it easy to calculate the effect of polarisation components (wave plates, polarisers, etc.), but cannot describe partially polarised or unpolarised light. A Stokes vector uses four real numbers (S0, S1, S2, S3) to describe any polarisation state (including partial polarisation) and is the standard quantity in experimental measurement (polarimetry), but absolute phase information is lost. The three modes of this calculator are mutually equivalent (within the fully polarised domain).
How should the degree of polarisation DoP be understood?
The degree of polarisation DoP = √(S1²+S2²+S3²)/S0 takes values from 0 to 1. DoP = 1 means fully polarised (the field tip traces a fixed ellipse); DoP = 0 completely unpolarised (natural light, equal probability in all directions); and 0 < DoP < 1 partially polarised (a polarised component superposed on an unpolarised background). DOLP and DOCP are its linear and circular components.
What are the azimuth ψ and the ellipticity angle χ?
The azimuth ψ (0°–180°) is the angle of the major axis of the polarisation ellipse relative to the x-axis. The ellipticity angle χ (−45°–+45°) satisfies sin(2χ) = S3/I_pol (I_pol is the intensity of the polarised component, equal to S0 for fully polarised light) and determines the shape of the ellipse: χ = 0 is linear polarisation (b/a = 0), χ = ±45° circular polarisation (b/a = 1), and elliptical polarisation in between; the sign of χ also indicates the handedness (χ < 0 left-handed, χ > 0 right-handed).
How are left- and right-hand circular polarisation actually distinguished (handedness convention)?
The two conventions are opposite, so one must be agreed first. This tool uses the optics convention (observing against the propagation direction / looking towards the source): counter-clockwise rotation of the field vector is left-hand LCP (S3 < 0), clockwise right-hand RCP (S3 > 0). The engineering / IEEE convention looks along the propagation direction and reverses the signs. The two are different names for the same physical state, requiring only a sign flip of S3. The ‘Helicity convention’ note at the top of the page includes anchor examples and a way to tell them apart.
What is the axial ratio b/a, and how does it relate to the ellipticity angle?
The axial ratio is the ratio of the minor semi-axis b to the major semi-axis a of the polarisation ellipse, b/a = |tan χ|. For linear polarisation b/a = 0, for circular polarisation b/a = 1 (a = b), with elliptical polarisation in between. The smaller the axial ratio, the flatter the ellipse and the closer it is to linear polarisation; the closer the ratio to 1, the closer it is to circular.
What is partially polarised light, and can the calculator handle it?
Partially polarised light is formed by the incoherent superposition of ‘a fully polarised component’ and ‘an unpolarised (natural light) component’, with total intensity S0 = polarised intensity + unpolarised intensity and polarised intensity I_pol = √(S1²+S2²+S3²). This tool’s Stokes mode supports it directly: any set satisfying S1²+S2²+S3² ≤ S0² is physically realisable; the DoP given is the polarised fraction and the ellipse parameters describe the polarised component (the Jones vector likewise reconstructs only the polarised component, normalised to unit polarised intensity).
How is the Poincaré sphere read?
Treat (S1, S2, S3) as a three-dimensional coordinate whose endpoint lies on a sphere of radius S0 centred on the origin (fully polarised) or inside it (partially polarised). The north pole (+S3) is right-hand circular polarisation RCP, the south pole left-hand LCP, and the equator (S3 = 0) linear polarisation; longitude is 2ψ and colatitude 2χ. The geometrical position and handedness of a polarisation state can be read at a glance.
What should I enter for the phase when inputting a Jones vector?
The relative phase δ = φ_y − φ_x determines the polarisation form; the overall absolute phase does not affect the state (it merely sets the time origin). The most common approach is to set φ_x = 0 and enter φ_y as the difference from φ_x. This tool takes the amplitude and phase of each of E_x and E_y, automatically computes the relative phase and obtains S2 and S3 from it. Amplitudes simply need to be non-negative.
Why does the Stokes input sometimes report ‘unphysical’?
A Stokes vector must satisfy S1²+S2²+S3² ≤ S0² (equality corresponds to full polarisation). If your values make the left side larger than the right, that set of Stokes parameters cannot be produced by any real optical field (for example, too small an intensity with an excessively large polarised component); check the data source and units. S0 must be positive.
Related optical tools
Other calculators in the same series, usable in combination:


