TSMC, Intel and Samsung are collectively betting on glass substrates. TGV (Through Glass Via) has become a key process in advanced packaging, and laser processing equipment is now in the spotlight. In 2026, the curtain on TGV commercialization has officially risen, and domestic laser equipment companies are racing to secure their positions.
What Is TGV and Why Now
Traditional advanced packaging substrates mainly use organic materials (such as ABF substrates) and silicon substrates, but both have hit performance ceilings. Organic substrates are limited by relatively high dielectric constants and loss factors, so signal transmission speed and integrity struggle to meet the increasingly stringent demands of AI chips; silicon substrates offer excellent performance but are costly and slow to process, making it hard to support large-scale mass production.
The advantages of glass substrates stand out against this backdrop: a low dielectric constant (about 4.6-6.8, below the ~5.5 of organic substrates and silicon’s 11.8) means lower signal delay and loss; an extremely low coefficient of thermal expansion (highly matched with silicon chips) eliminates warpage and reliability problems caused by thermal stress; ultra-high flatness supports finer wiring pitch and denser interconnects; and excellent chemical stability and hermeticity ensure long-term reliability. These characteristics make glass substrates the mandatory choice for packaging material upgrades in the era of exploding AI computing power.
2026 is widely regarded by the industry as the first year of TGV commercialization. TSMC plans to start glass substrate mass production in the second half of 2026, and Intel and Samsung have successively announced glass substrate roadmaps — the downstream demand side has already sent a clear signal.
TGV Process Difficulties and the Role of Lasers
The TGV process chain is long and the technical barriers are high, with core bottlenecks concentrated in three steps: microvia formation, void-free copper filling (RDL front end) and multilayer wiring. Among them, microvia formation is the starting point of the whole process chain and the cornerstone that determines subsequent yield.
In the microvia formation step, the laser is the only means capable of achieving micron-level high-precision microvias. Traditional mechanical drilling typically achieves precision above 100 μm, far from meeting the 5-50 μm via diameter requirements of the TGV process; ultrasonic drilling is inefficient with poor hole-wall quality; plasma etching is accurate but extremely costly and inefficient. Only laser processing can strike a balance among precision, efficiency and cost.
The current mainstream route is LIDE (Laser-Induced Deep Etching): ultrafast lasers (picosecond or femtosecond) are first used to locally modify the glass, forming highly selective etch channels, and the modified regions are then removed by wet etching to form high-quality through holes. This two-step “laser modification + wet etching” approach balances machining precision and hole-wall quality.
In the choice of ultrafast lasers, femtosecond lasers offer clear advantages over picosecond lasers: femtosecond pulses last shorter (on the order of 10-15 seconds) and have higher peak power; material removal relies almost entirely on nonlinear absorption, so the heat-affected zone is extremely small, glass microcracks and thermal stress damage are significantly lower than with picosecond lasers, and via walls are smoother with more controllable taper — all critical for the subsequent copper filling process.
Overview of Domestic Equipment Players
In the TGV laser processing equipment track, multiple domestic companies have formed differentiated layouts, each with its own focus spanning lasers, complete machines and process solutions.
DR Laser: the absolute leader in photovoltaic laser equipment. Leveraging the precision laser processing capabilities accumulated in the PV field, it was the first to enter the TGV track. The company’s TGV laser microvia equipment has been delivered in batches to industry-leading customers such as WG Tech and BOE, with products covering both wafer-level and panel-level specifications, making it one of the fastest-moving players in commercializing domestic TGV laser equipment.
DeLong Laser: a leader in precision micro-machining, with years of deep engagement in semiconductor laser processing. The company holds an industry-leading position in semiconductor TGV drilling and has completed equipment verification at leading packaging and testing plants; its products are known for high precision and high stability, and it is ahead in customer verification progress.
HGTECH: the company’s TGV glass through-hole laser processing intelligent equipment has completed whole-machine finalization, with core components 100% domestically sourced — an important milestone for domestic substitution. In terms of key specifications, the equipment supports 5 μm microvia machining at a speed of 8,000 holes per second and has completed pilot-scale verification. HGTECH’s differentiation lies in whole-machine integration capability and full-chain domestic sourcing, which carries strategic significance in terms of supply chain security.
Hymson: follows an integrated laser + etching route, providing a closed-loop solution from laser hole modification to wet etching. The company covers nanosecond, picosecond and femtosecond laser sources across the full range, giving its products high flexibility. Hymson has set a 0 ppm defect rate target, reflecting its process philosophy of the ultimate pursuit of yield, which is persuasive in verification with high-end customers.
Han’s Laser: as a global leader in laser equipment, Han’s Laser’s product line covers multiple steps of the TGV process chain. Its core advantages are a vast customer resource network and a mature delivery system, allowing it to quickly enter existing customer production lines and make up for the first-mover time gap with channel strength.
Raycus Laser: the domestic fiber laser leader, whose subsidiary Guoshen Photoelectric (国神光电) focuses on ultrafast lasers. The company’s picosecond/femtosecond lasers are already in batch use in precision machining scenarios such as silicon carbide cutting, and lasers for TGV hole drilling are also in progress. Raycus’s value lies in achieving domestic sourcing at the laser source level — a key link in the upstream industry chain.
Market Pace and Investment Risks
The market pace of TGV laser equipment can be observed in stages:
2026-2027: concentrated advancement from sample trials and pilot testing to customer verification. Leading companies are currently at the equipment sampling or small-batch verification stage, with limited order volume. The core point to watch in this stage is which companies can first pass production-line verification at leading packaging and testing plants.
2027-2028: only those who can nail down yield and reliability are qualified to talk about scale. The TGV process chain is long, and single-point breakthroughs are not enough — the yields of microvia formation, copper filling and wiring must all meet targets simultaneously, placing extremely high demands on equipment stability and process consistency.
Special attention should be paid to the fact that many companies are currently at the “verification/pilot testing” stage and have not yet contributed real revenue. As an emerging process, TGV’s industrialization progress is uncertain, and there may be a time lag between market expectations and actual implementation.
Conclusion
TGV laser equipment is the critical choke point of glass substrate mass production — without high-quality microvias there is no reliable copper filling, let alone multilayer wiring and final packaging. Domestic laser equipment companies have completed the shift from follower to peer in this core step, and the finalization of HGTECH’s 100% domestically sourced whole machine marks a key milestone. But industrialization still takes time: from passing verification to batch supply and then to contributing revenue, every step requires solid technology accumulation and the accumulation of customer trust. The TGV track is a long slope with thick snow; the companies that truly emerge will be those that deliver on yield, efficiency and cost simultaneously.



Leave a Reply