In September 2026, laser additive manufacturing reached an important technological inflection point. The team of Cao Yanlong at Zhejiang University made breakthrough progress in 450nm blue laser pure copper 3D printing, while Addireen released its third-generation dual-green volume-production machine, marking the official move of short-wavelength laser copper 3D printing from the laboratory to industrial mass production.
The “Physical Dilemma” of Pure Copper 3D Printing and the Short-Wavelength Breakthrough
With its excellent thermal conductivity, pure copper has become a core material for AI compute cooling cold plates, new energy electronic control water-cooling structures, commercial aerospace thrust chambers, and other scenarios. However, conventional infrared lasers (1064nm) have long faced a physical bottleneck in pure copper 3D printing: pure copper absorbs only about 5% of infrared laser light, and most of the energy is directly reflected — not only does the copper powder melt poorly, the reflected beam can also damage optical components.
Even raising the laser power triggers severe melt pool spatter, causing large numbers of porosity defects inside printed parts. Moreover, given pure copper’s extremely high thermal conductivity, heat dissipates quickly after local melting, the melt pool is hard to keep stable, and quality problems such as loose interlayer bonding and part cracking occur frequently. Green light (532nm) raises the absorption rate to about 40%, but a clear technical ceiling remains.
Zhejiang University’s 450nm Blue Laser: 13x Absorption Increase, 99.9% Density
The team of Cao Yanlong at Zhejiang University developed its own 450nm blue laser SLM (selective laser melting) printing equipment, achieving a technical breakthrough at the light source level. Measured data show that pure copper’s absorption rate of blue laser light reaches 65%, 13 times that of conventional infrared lasers, with energy utilization improved more than tenfold.
Ample and stable energy absorption makes the melt pool’s forming state far more controllable, and powder spatter is significantly reduced during printing. The resulting pure copper parts reach a density of 99.9%, with dense internal structures free of obvious defects and thermal conductivity close to the level of industrial-grade forged pure copper. More critically, the technology requires no modification of the copper powder, fully preserving pure copper’s native thermal and electrical conductivity, and can be directly used to produce shaped water-channel cooling structures and new energy electronic control water-cooling components.
In the contest between blue and green laser technology routes, blue light shows better overall performance: higher energy conversion efficiency, a wider process forming window, and stronger fault tolerance. Industry consensus is gradually forming — short-wavelength blue light is currently the optimal solution for high-precision pure copper printing.
Volume Production Lands: Addireen’s Dual-Green Equipment Aimed at Industrial Delivery
The other side of the technical breakthrough is the advance of volume production. At the recent Formnext Shenzhen show, Addireen released its third-generation volume-production model, the XH-M350G-2HR dual-green metal 3D printing machine. At an 80 μm layer thickness, the machine’s forming efficiency reaches 48.48 cm³/h, nearly 40% higher than the previous generation, compressing the printing cycle of a single liquid cooling plate from several days to a dozen or so hours.
Addireen is backed by parent company Gongda Laser’s self-developed high-power green lasers, keeping core light source technology under its own control. It has built a complete equipment matrix covering 100 mm to 1.2 m, and the phase II production base in Jiangxi can reach a monthly capacity of 30 to 50 units. Its two key pain points under attack — full-plate printing consistency and 7×24-hour continuous production — have already passed accumulated continuous-run stress testing of more than 2,000 hours at the Jiangxi base.
Driven by Two Major Application Scenarios: AI Cooling and Commercial Aerospace
The industrialization of short-wavelength laser copper 3D printing is driven by two high-certainty tracks:
AI compute cooling: As AI chip power consumption keeps climbing, conventional manufacturing processes struggle to realize complex cooling structures such as microchannels and TPMS lattices, and 3D-printed pure copper liquid cooling plates and optical module heat sinks are welcoming a scale-up opportunity.
Commercial aerospace: Copper alloy thrust chambers and combustion chamber liners are the core hot-end components of liquid rocket engines. Industry demand has shifted from prototype demonstration to engineering-scale production of flight-grade components, placing stringent requirements on large-size forming and full-process traceability.
Industry Impact and Outlook
The industrialization breakthrough of blue/green laser copper 3D printing will have a far-reaching impact on the laser device and optical component supply chain. On one hand, demand for high-power blue/green lasers will grow rapidly, and related light source technologies and devices will gain new market space; on the other hand, the scaling of copper additive manufacturing will open new application scenarios for laser optics (such as focusing lenses, protective windows, and beam shaping elements).
For laser industry practitioners, the technological maturity of short-wavelength laser light sources and the pace of their cost decline will be the key variables determining the industrialization rhythm of this track. Over the next 1-2 years, as more volume production cases land, blue/green copper 3D printing is expected to move comprehensively from “technically feasible” to “industrially reliable”.
Disclaimer: This news is compiled from public reports for reference only and does not constitute any investment advice. Information sources: Yangtze River Delta G60 Laser Alliance, 3D Printing Ecosystem, and others.



Leave a Reply