In laser processing systems, the beam expander is an often-overlooked yet critical optical component. It connects the three core components — the laser source, the galvo scanner, and the F-Theta lens — and a wrong selection directly affects processing quality and efficiency. This article systematically explains how a beam expander works, its structural options, and the key selection points.
h2. Why Is a Beam Expander Needed?
Many newcomers may wonder: why add a beam expander at the laser output? Can’t we just use the beam as it comes out of the laser source?
This goes back to the nature of laser light. A laser beam naturally diverges: even a high-quality laser source produces a beam that gradually grows wider during propagation. Without a beam expander:
| Problem | Consequence |
|---|---|
| Large beam divergence angle | Spot size grows over distance; precision degrades |
| High energy density | Galvo mirrors take high-energy impacts and are easily damaged |
| Limited focusing capability | Best processing results cannot be achieved |
Adding a beam expander **enlarges the beam diameter and compresses the divergence angle**, solving these problems at the root.
h2. Core Functions of a Beam Expander
h3. Lower power density to protect the galvo scanner
After the laser beam passes through the beam expander, its diameter is enlarged, and the spot area increases by the square of the magnification. This means the energy density acting on the galvo mirrors drops substantially.
*Example:* with a 4X beam expander, the spot area becomes 16 times larger, and the energy density drops to 1/16 of the original.
h3. Compress the divergence angle for better long-distance delivery
Another core function is compressing the beam divergence angle. An N-times beam expander compresses the divergence angle to 1/N of the original.
*Formula:* output divergence angle θO = input divergence angle θI / magnification M
h3. Reduce the focused spot for higher processing precision
According to optical principles, the focused spot size is inversely proportional to the incident beam diameter:
*Formula:* focused spot diameter ≈ 4λM²f / (πD)
where D is the incident beam diameter. Enlarging D with a beam expander yields a smaller focused spot and thus finer processing.
h2. How It Works in Detail
h3. Optical principle of the beam expander
A beam expander is essentially a telescope system whose magnification is determined by the focal-length ratio of its two lenses:
*Formula:* MP = f eyepiece / f objective = DO / DI = θI / θO
where:
– MP = magnification
– f eyepiece = focal length of the eyepiece lens
– f objective = focal length of the objective lens
– DO = output beam diameter
– DI = input beam diameter
– θI = input divergence angle
– θO = output divergence angle
h3. Comparison of the two optical architectures
By optical architecture, beam expanders fall into **Keplerian** and **Galilean** types:
| Item | Keplerian | Galilean |
|---|---|---|
| Structure | Two positive lenses | One negative lens + one positive lens |
| Internal focus | Real internal focus present | No real internal focus |
| Spatial filtering | Possible | Not possible |
| Size | Larger | Compact |
| High-power suitability | Poor (air ionization issues) | Excellent |
| Typical applications | Low-power research, spatial filtering | Industrial high-power laser processing |
*Why is the Galilean type the first choice for industrial laser processing?*
# **No internal focus:** avoids damage caused by air ionization and energy concentration
# **Compact structure:** easy to integrate into compact laser equipment
# **High damage threshold:** meets the demands of high-power laser sources
h2. The Matching Rule in Detail: The Core Selection Law
This is the most critical part; many selection mistakes come from not understanding this law:
*Key formula:* laser output beam diameter × beam expander magnification ≤ galvo aperture ≤ F-Theta entrance pupil diameter
h3. Interpreting the formula
– **Laser output beam diameter × magnification:** this is the expanded beam diameter
– **Galvo aperture:** the maximum beam diameter the galvo mirrors can reflect
– **F-Theta entrance pupil:** the maximum beam diameter the F-Theta lens can accept
h3. Practical example
*Example configuration:*
| Parameter | Specification |
|---|---|
| Laser output beam | 3mm |
| Beam expander magnification | 4X |
| Expanded beam | 12mm |
| Galvo aperture | 12mm |
| F-Theta entrance pupil | 12mm |
*Verification:* 3mm × 4 = 12mm ≤ 12mm ≤ 12mm ✓
h3. Consequences of a mismatched ratio
*If the magnification is too large:*
Suppose a 5X expander outputs a 15mm beam:
– a 12mm-aperture galvo can only reflect 12mm
– 3mm of the beam is wasted (20% energy loss)
– marking lines become shallower and quality degrades
*Solutions:*
| Option | Configuration | Added cost |
|---|---|---|
| Option A | Upgrade to a 20mm-aperture galvo scanner | approx. +1500 CNY |
| Option B | Upgrade to a 20mm-entrance-pupil F-Theta lens | approx. +800 CNY |
h2. Trade-off Analysis: Speed vs. Precision
In practice, beam expander selection involves a trade-off between **speed** and **precision**:
| Goal | Configuration | Characteristics |
|---|---|---|
| Speed priority | Small-aperture galvo (3-10mm) + low-magnification expander | Lighter mirrors, lower inertia, faster response |
| Precision priority | Large-aperture galvo (15-20mm) + high-magnification expander | Fine spot, better focusing, higher precision |
*Reality check:* you often cannot have both; choose according to the specific application requirements.
h2. Applications in Different Laser Processing Equipment
h3. Laser marking machines
*Application characteristics:*
– high-resolution marking requirements
– micron-level fine processing
– high-speed scanning systems
*Recommended configurations:*
– UV marking machine (355nm): 2-10X beam expander
– fiber marking machine (1064nm): 3-10X beam expander
h3. Laser cutting machines
*Application characteristics:*
– precision edge cutting
– reduced material loss
– improved cutting-speed consistency
*Recommended configurations:*
– high-power laser source paired with a high-damage-threshold beam expander
– choose 6-10X expansion based on spot-size requirements
h3. Laser welding machines
*Application characteristics:*
– improved welding precision
– controlled laser focal position
– optimized energy-delivery efficiency
*Recommended configurations:*
– choose a suitable magnification based on weld-spot size
– prioritize beam quality over speed
h2. Key Selection Parameters
h3. Operating wavelength
*Must exactly match the laser output wavelength!*
| Laser type | Wavelength | Beam expander type |
|---|---|---|
| Fiber laser | 1064nm | 1064nm-dedicated beam expander |
| UV laser | 355nm | 355nm-dedicated beam expander |
| Green laser | 532nm | 532nm-dedicated beam expander |
| CO2 laser | 10.6μm | 10.6μm-dedicated beam expander |
*⚠️ Warning:* a wavelength mismatch will damage the beam expander or severely degrade beam quality!
CO2 Laser Output Beam Diameter Explained
CO2 lasers differ significantly in output beam diameter depending on the excitation method. Understanding these differences is essential for choosing the right beam expander.
Classification by Excitation Method
| Laser type | Excitation method | Output beam diameter |
|---|---|---|
| Glass-tube CO2 laser | DC excitation | 2-4mm |
| Metal-tube CO2 laser (RF tube) | RF excitation (e.g., 81.36MHz) | 1.5-3mm |
Terminology Clarification
When purchasing or selecting, you may encounter the following names; they refer to the same type of product:
Metal-tube CO2 laser = RF-excited CO2 laser = RF-tube CO2 laser
All three are CO2 lasers excited by an RF power supply, as opposed to the traditional glass-tube DC excitation. RF power supplies typically operate in the tens-of-MHz range, e.g. the common 81.36MHz.
Why Does the RF (Metal) Tube Have a Smaller Beam?
Compared with glass-tube CO2 lasers, RF-tube CO2 lasers offer the following advantages:
1. Better beam quality: close to TEM00 mode; the beam mode is purer and more stable
2. Smaller divergence angle: a finer focused spot, suitable for precision processing
3. Higher beam stability: good power stability, suitable for high-precision marking
4. Longer lifetime: the electrodes do not participate in the discharge; lifetime can reach tens of thousands of hours
These advantages make RF-tube CO2 lasers widely used in precision laser processing.
h3. Magnification
Choose the right magnification according to the matching law:
# first determine the laser output beam diameter
# then determine the galvo aperture diameter
# calculate: magnification = galvo aperture / laser output beam diameter
h3. Damage threshold (LIDT)
Make sure the beam expander’s damage threshold meets the laser power requirements:
– low-power applications (<20W): standard-coated beam expanders are sufficient
- high-power applications (>20W): choose high-damage-threshold materials (e.g., fused silica, ZnSe)
– ultra-high power: consider water-cooled beam expanders
h3. Other important parameters
| Parameter | Description | Selection advice |
|---|---|---|
| Wavefront distortion | Affects beam quality | High-quality products should be controlled within λ/10 |
| Lens material | Affects transmission and damage threshold | Fused silica for high power; optical glass acceptable for low power |
| Mounting method | Thread specification must match | Common threads: M21×1 or M22×0.75 |
| Adjustment method | Sliding vs. rotating | Sliding type offers better beam stability |
h2. Common Mistakes and How to Avoid Them
*❌ Mistake 1: the larger the magnification, the better*
*Wrong belief:* a higher expansion ratio means better beam quality.
*Correct understanding:* the magnification must be matched with the galvo scanner and the F-Theta lens. An excessively large magnification causes:
– beam size exceeds the galvo aperture, wasting energy
– higher load on the galvo and a shorter lifetime
– significantly higher cost
*Advice:* strictly follow the matching law and choose the most suitable magnification.
*❌ Mistake 2: ignoring wavelength matching*
*Wrong belief:* beam expanders for different wavelengths are interchangeable.
*Correct understanding:* each wavelength requires a dedicated beam expander; lens coatings are optimized for specific wavelengths.
*Advice:* confirm the laser wavelength before purchase and select the expander for the corresponding wavelength.
*❌ Mistake 3: using a Keplerian expander in high-power applications*
*Wrong belief:* the Keplerian design is simpler and more reliable.
*Correct understanding:* a Keplerian expander has an internal focus; at high power it causes air ionization and can even damage optical components in severe cases.
*Advice:* for industrial high-power laser processing, always choose a Galilean beam expander.
*❌ Mistake 4: judging by price alone*
*Wrong belief:* all beam expanders are about the same; just pick the cheapest.
*Correct understanding:* low-quality beam expanders may cause:
– poor beam quality and unsatisfactory processing results
– low damage threshold and easy damage
– large wavefront distortion that harms precision
*Advice:* choose products from reputable manufacturers and focus on specifications rather than price alone.
h2. Summary
*Key points recap:*
# **Three core functions of a beam expander:** lower power density, compress the divergence angle, reduce the focused spot
# **Matching law:** laser output beam × expansion ratio ≤ galvo aperture ≤ F-Theta entrance pupil
# **Architecture choice:** for industrial high-power applications, prefer the **Galilean** type
# **Four selection factors:** wavelength match, suitable magnification, adequate damage threshold, compatible specifications
*Selection checklist:*
When selecting, confirm each item:
– ☐ expander wavelength matches the laser
– ☐ expanded beam diameter ≤ galvo aperture
– ☐ galvo aperture ≤ F-Theta entrance pupil
– ☐ damage threshold meets the power requirement
– ☐ thread specification compatible with the equipment
– ☐ architecture suitable for the application scenario
—
If you have any questions during beam expander selection, feel free to consult our technical team.
*This article was prepared by the Soar Laser technical team, dedicated to providing quality components and technical support for the laser processing industry.*
Sales & support hotline: 400-055-8805



Leave a Reply