The laser is the core of any laser processing system. Different laser types have their own distinctive technical characteristics and application ranges. This article compares all major industrial lasers in detail to help you make the right selection decision.
1. Overview of the Main Laser Types
1. Fiber Laser
A fiber laser uses rare-earth-doped fiber (Yb, Er) as the gain medium, with energy supplied by semiconductor pump diodes.
- Wavelength: 1064 nm (near infrared)
- Electro-optical efficiency: 25-35%
- Beam quality: Excellent (M² <1.5)
- Power range: 100 W-100 kW+
- Advantages: high efficiency, low maintenance, flexible fiber delivery
- Main applications: metal cutting, welding, marking
2. CO₂ Laser
A CO₂ laser uses a gas mixture (CO₂, N₂, He) as the gain medium, excited by electrode discharge.
- Wavelength: 10600 nm (far infrared)
- Electro-optical efficiency: 10-15%
- Beam quality: Good (M² ≈2-3)
- Power range: 100 W-10 kW
- Advantages: good absorption by non-metals, stable and reliable
- Main applications: non-metal cutting, engraving, drilling
3. Solid-State Laser
A solid-state laser uses a crystal (e.g., Nd:YAG, Nd:YVO₄) as the gain medium.
- Wavelength: 1064 nm/532 nm/355 nm (via frequency doubling)
- Electro-optical efficiency: 5-10%
- Beam quality: Good
- Advantages: can deliver short wavelengths, compact structure
- Main applications: fine processing, welding, drilling
4. Diode Laser
A diode laser generates laser light directly from semiconductor materials (GaAs, InP).
- Wavelength: 808-1550 nm (multiple options)
- Electro-optical efficiency: 40-60%
- Beam quality: Poor (M² >10)
- Power range: 10 W-10 kW+
- Advantages: highest efficiency, smallest size, low cost
- Main applications: cladding, hardening, plastic welding
2. Technical Parameter Comparison
| Parameter | Fiber laser | CO₂ laser | Solid-state laser | Diode laser |
|---|---|---|---|---|
| Wavelength | 1064nm | 10600nm | 1064nm | 808-1550nm |
| Electro-optical efficiency | 30%+ | 10-15% | 5-10% | 40-60% |
| Beam quality | Excellent | Good | Good | Average |
| Peak power | High | Medium | High | Medium |
| Average power | 100W-100kW | 100W-10kW | 100W-6kW | 10W-10kW |
| Lifetime | 100,000+ hours | 20,000-30,000 hours | 10,000-20,000 hours | 30,000-50,000 hours |
| Maintenance | Extremely low | Relatively high | Moderate | Low |
3. Application Field Comparison
| Application field | Recommended laser | Reason |
|---|---|---|
| Metal cutting | Fiber laser | High power, high efficiency, high beam quality |
| Metal welding | Fiber laser, solid-state laser | Both deep-penetration (keyhole) welding and heat-conduction welding can be achieved |
| Non-metal cutting | CO₂ laser, fiber laser | CO₂ is well absorbed by non-metals |
| Laser marking | Fiber laser, solid-state laser | High repetition rate, high beam quality |
| Laser cladding | Diode laser, fiber laser | High efficiency, large-area coverage |
| Laser hardening | Diode laser, fiber laser | Uniform heating, high efficiency |
| Fine micromachining | Solid-state laser (picosecond/femtosecond) | Ultrashort pulses, extremely small heat-affected zone |
4. Key Selection Factors
1. Workpiece Material
- Metals: fiber lasers are the first choice (high absorption by metal)
- Non-metals: CO₂ lasers are more suitable (high absorption by non-metals)
- Highly reflective materials (copper, aluminum, brass): choose a fiber laser with strong anti-reflection capability
2. Process Requirements
- High-speed cutting: choose a high-power fiber laser
- Precision welding: choose a laser with high beam quality
- Surface treatment: a diode laser or fiber laser can be used
3. Operating Cost
- Power consumption (best to worst): diode laser > fiber laser > CO₂ laser > solid-state laser
- Maintenance: CO₂ lasers require periodic replacement of gas and optical components
- Consumables: diode and fiber lasers need the fewest consumables
4. Site Conditions
- Restricted space: diode lasers have the smallest footprint
- High power requirements: fiber lasers can be scaled modularly
5. Selection Recommendations at a Glance
Choose a fiber laser when:
- You mainly process metal materials
- You need high efficiency and low operating cost
- You pursue high-quality cut edges
- The equipment must run stably for long periods
- Power demand is above 1 kW
Choose a CO₂ laser when:
- You mainly process non-metal materials (wood, acrylic, leather, etc.)
- You have a stable industrial power supply environment
- You have special requirements on laser wavelength
Choose a solid-state laser when:
- You need fine micromachining
- You need multiple wavelengths (frequency doubling)
- You work with pulsed laser applications
Choose a diode laser when:
- Surface treatment (cladding, hardening) is the main task
- You pursue the highest electro-optical efficiency
- Budget is limited but high power is needed
- Space is restricted
Closing Remarks
Selecting the right laser requires weighing workpiece material, process requirements, operating cost and site conditions together. With high efficiency, low maintenance and high beam quality, fiber lasers are seeing ever wider use in industrial processing. Yet CO₂ lasers, solid-state lasers and diode lasers still hold irreplaceable advantages in their own fields of strength. Users are advised to communicate fully with professional suppliers and run process trials before making a selection, so as to determine the laser type that best fits their needs.
References: laser industry technical handbooks and product specifications from laser manufacturers



Leave a Reply