Description
Product Overview
The cylinder inner-wall marking module is designed for marking the wall of an internal cavity: a 45 degree folding mirror redirects the laser beam radially, and a red aiming beam shows where the mark will land, so the module can reach inside a cylindrical part and write text and graphics on the inner wall. The module connects to the output of a galvo scanner, so an existing marking machine can be upgraded to inner-wall marking. It is widely used for inner-wall identification and anti-counterfeit lettering on vacuum flasks, drinking cups and cans. The reflective structure guides the beam onto the inner wall and, combined with workpiece rotation, letters the full circumference; during installation keep the optical axis coaxial with the workpiece axis.
Key Features
- Reaches the inner wall: the 45 degree folding structure extends into the cylindrical cavity
- Red beam aiming: the red indicator shows the marking position on the inner wall for straightforward alignment
- Marking machine upgrade: connects directly to the galvo scanner output
- Identification and anti-counterfeiting: inner-wall lettering is well hidden from view
- Diameter matching: choose the barrel length according to the inner diameter range
Technical Specifications
| Type | Cylinder inner-wall marking module |
| Composition | 45 degree folding lens barrel, red aiming indicator, lens group |
| Function | Laser marking on the inner wall of cylindrical cavities |
| Mounting | Galvo scanner output |
| Compatible machines | Fiber laser marking machines |
Applications
Inner-wall lettering and anti-counterfeit marking on vacuum flasks, drinking cups, cans and cylindrical shells. The same module also suits comparable processes; non-standard customization and volume programs can be discussed, and drawings or process requirements can be submitted for a detailed evaluation.
Selection Guide
- The mounting surface of the mirror holder must be clean and flat. Loosen the locking screw before fine adjustment, then lock it again; never force the screw, which would stress and damage the optic.
- Confirm the angle of incidence and orientation of mirrors and beam splitters against the optical layout drawing. The beam should fall completely inside the clear aperture of the optic, with no clipping at the edge.
- Models in the same series differ in power handling, clear aperture, interface and function modules. For volume purchasing or production line integration, samples and a solution evaluation can be requested.
- This item is genuine factory stock and ships with a packing list and warranty certificate. Warranty and spare part support are provided from the date of receipt as agreed; consumable wear parts such as optics and seals are excluded.
- This model is the cylinder inner-wall marking module, and its key specifications are listed in the table above. For higher power, a larger aperture or a different interface or focal length version, contact us for a series comparison and a quotation.
Usage Precautions
- Never look directly into the beam or specular reflections while the laser is running. Mark the work area with warning signs, install protective shielding and wear safety goggles matched to the wavelength in use.
- Use purified or deionized water in the water cooling circuit and replace it regularly. If water temperature or flow triggers an alarm, stop the machine, find the cause and only then restart.
- Electrical wiring and servicing must be carried out by a licensed electrician. Switch off and tag out before working, and make sure the equipment is reliably grounded to prevent leakage and interference.
- Protect the equipment from moisture and dust during transport and storage. Before long idle periods, drain the water circuit, disconnect power and cover the unit against dust.
- The adjustment mechanism is a precision assembly; avoid impacts and drops. Clamp optics with even pressure and lock them before starting a marking process.
- On receipt, check the model nameplate against the accessory list. If you meet any problem during installation or commissioning, contact Soar Laser technical support (hotline +86 159-2722-0467) for remote or on-site help.
FAQ
What is the smallest inner diameter that can be marked?
The limit is set by the outer diameter of the lens barrel; tell us the inner diameter and we will match the right specification.
How is the marking depth on the inner wall controlled?
Set the parameters to suit the material and power. Several shallow passes are more uniform than one deep pass.
How is focusing handled?
The optics are configured to a fixed focal length for the workpiece inner diameter; clamp and position the part, then verify the position with the red aiming beam.
Disclaimer
The specifications on this page are compiled from the manufacturer's public information and existing documentation and are for selection reference only. Product specifications are subject to the actual item, the factory inspection report and the latest manufacturer data sheet; appearance and configuration may change between batches, so please confirm with us before ordering. Reproduction of this page without written permission is prohibited.
Sales and selection support: Changsha Soar Laser Equipment Co., Ltd., hotline +86 159-2722-0467, www.soar-laser.cn, email 859818709@qq.com.







Reviews
There are no reviews yet.