Description
Product Overview
The Thorlabs PF03-03-P01 is a Ø7.0 mm plano mirror carrying a protected silver coating on a fused silica substrate. Average reflectance is above 97% from 450 nm to 2 µm and above 95% from 2 to 20 µm, so one part covers the visible, the near-infrared and the thermal infrared. The substrate is 2.0 mm thick, the reflecting face is figured to λ/10 peak to valley at 633 nm and polished to 40-20 scratch-dig, and parallelism is held inside 3 arcmin.
Silver is the reason to buy this mirror. Of the metal films Thorlabs deposits, silver has the highest reflectance, and between 450 and 800 nm there is no competing metal at that level: protected gold, the other broadband choice, is specified only from 800 nm upward, so across the blue, green and red it is already giving away several percent while silver is still above 97%. Above 800 nm the two curves converge and gold becomes the more forgiving part because it does not oxidise. The weakness of silver is exactly that: a bare silver film tarnishes in air and loses reflectance from the surface inward. The coating design answers it with a durable SiO2 overcoat approximately 100 nm thick, which seals the metal from the atmosphere. The seal slows tarnishing but does not abolish the problem, so storage in high humidity is excluded and the optic is handled with gloves.
The 7.0 mm format is the smallest round item in this family and, with the 35 mm x 52 mm rectangular mirror, the only one that is not laser engraved on the back with its part number; there is no room for the marking at this diameter, so identify the part from its packaging. Thickness is 2.0 mm with a tolerance of ±0.2 mm, clear aperture is more than 90% of the diameter, and the size exists for compact assemblies: it seats in the MK7 and MK7/M mini-series kinematic mount and in the LMR7 and LMR7/M fixed mount, which keeps a folded path small without surrendering a λ/10 figure.
A further consequence of a flat, wide reflectance band is that the mirror suits ultrafast work, where a narrowband dielectric stack would restrict the bandwidth and add dispersion. Thorlabs publishes two pulsed ratings for this coating: 0.225 J/cm² at 800 nm with 99 fs pulses at 1 kHz, and 1 J/cm² at 1064 nm with 10 ns pulses at 10 Hz. The continuous ratings, 500 W/cm at 1.07 µm and 1500 W/cm at 10.6 µm, are quoted as linear power density because a metal film fails by thermal runaway along the illuminated line rather than at a single point.
Key Features
- Protected silver coating: average reflectance above 97% from 450 nm to 2 µm and above 95% from 2 to 20 µm, with an SiO2 overcoat roughly 100 nm thick sealing the silver
- The coating to pick between 450 and 800 nm: protected gold is specified only from 800 nm, so for blue, green and red beams silver returns more light on every reflection
- Ø7.0 mm x 2.0 mm fused silica: λ/10 peak-to-valley figure at 633 nm, 40-20 scratch-dig, parallelism inside 3 arcmin, clear aperture above 90% of the diameter
- Mounts directly: MK7 and MK7/M kinematic mounts, LMR7 and LMR7/M fixed mounts, no adapter ring needed
- Ultrafast capable: 0.225 J/cm² at 800 nm with 99 fs pulses and 1 J/cm² at 1064 nm with 10 ns pulses, published rather than estimated
- Not engraved: at 7.0 mm there is no room for the part number marking used on the larger diameters, so keep the part in its identified case
Technical Specifications
| Parameter | Value |
|---|---|
| Model | PF03-03-P01 |
| Coating | Protected silver with SiO2 overcoat |
| Overcoat thickness | Approximately 100 nm |
| Wavelength range | 450 nm – 20 µm |
| Average reflectance | Above 97% from 450 nm to 2 µm; above 95% from 2 to 20 µm |
| Substrate | Fused silica |
| Diameter | 7.0 mm (0.28 inch) |
| Diameter tolerance | +0.0 mm / -0.1 mm |
| Thickness | 2.0 mm (0.08 inch) |
| Thickness tolerance | ±0.2 mm |
| Surface flatness | λ/10 peak to valley at 633 nm |
| Surface quality | 40-20 scratch-dig |
| Parallelism | Under 3 arcmin |
| Clear aperture | Above 90% of the diameter |
| Pulsed damage threshold | 0.225 J/cm² (800 nm, 99 fs, 1 kHz, Ø0.167 mm); 1 J/cm² (1064 nm, 10 ns, 10 Hz, Ø1.010 mm) |
| CW damage threshold | 500 W/cm (1.07 µm, Ø0.974 mm); 1500 W/cm (10.6 µm, Ø0.339 mm) |
| Part number engraving | None at this diameter |
| Source | Thorlabs official product page |
Applications
- Multi-harmonic beam delivery: a green second harmonic and the 1064 nm fundamental can share the same folding mirror without a coating change, because both sit inside the specified band at above 95% reflectance
- Femtosecond beam steering: an oscillator or amplifier output can be routed with a metal film instead of a dielectric pair, which avoids the bandwidth cut and the dispersion penalty
- Visible to thermal spectroscopy: a bench that has to fold 500 nm and 10 µm light in the same enclosure needs one optic with published reflectance at both ends, which is what the 450 nm – 20 µm band provides
- Compact imaging and fluorescence paths: the 7 mm optic in its MK7 or LMR7 mount keeps the footprint small where a Ø1/2 inch mount would not fit
- Interferometric folding: the λ/10 figure and the 40-20 polish matter when several reflections accumulate in a path-length-matched arm
Selection Guide
Two decisions order the choice: the band the beam occupies, and the aperture the beam needs. The table below lists the metal coatings offered on the same 7.0 mm substrate, so the mount and the optical axis stay the same whichever coating is selected.
| Coating | Band | Average reflectance | Part number | Where it wins |
|---|---|---|---|---|
| UV-enhanced aluminum | 250 nm – 450 nm | Above 90% | PF03-03-F01 | Below 450 nm only; soft film, not cleanable |
| Protected aluminum | 450 nm – 20 µm | Above 90% / above 95% | PF03-03-G01 | Broadband entry option, most tolerant of humidity |
| Protected silver | 450 nm – 20 µm | Above 97% / above 95% | PF03-03-P01 (this page) | Highest visible and near-infrared reflectance of the metals |
| Protected gold | 800 nm – 20 µm | Above 96% | PF03-03-M01 | Infrared workhorse; does not tarnish |
| MIR-enhanced gold | 2 µm – 20 µm | Above 98% | PF03-03-M02 | Thermal infrared, highest reflectance in that band |
| Unprotected gold | 800 nm – 20 µm | Above 97% | PF03-03-M03 | Highest gold reflectance where the face is never touched |
For aperture, size the optic so that the beam uses no more than about two thirds of the clear aperture; on a 7.0 mm mirror that leaves a beam of a few millimetres, which covers most single-mode and many multimode laser outputs. If the beam is wider, or if the layout calls for a standard half-inch holder, step up to the Ø1/2 inch protected silver mirror PF05-03-P01, which carries the same coating on a 12.7 mm substrate. The three infrared gold coatings above are the alternative when the beam never goes below 800 nm and long-term tarnish resistance matters more than the last percent of visible reflectance.
FAQ
Protected silver or protected gold? Decide on the shortest wavelength in the path. Silver is specified from 450 nm and holds above 97% through the visible and the near-infrared; gold is specified from 800 nm, so anything blue, green or red is reflected less efficiently by gold. Above 800 nm the reflectance curves are close and gold is the safer long-term part because it cannot tarnish.
Can it be used at 45 degrees, or only at normal incidence? Metal films are relatively insensitive to angle of incidence, which is why the same part serves a 45 degree fold and a near-normal return. The exception in the metallic range is the ultrafast-enhanced silver coating, which is specified at 45 degrees; this protected silver coating is not restricted that way.
Why is this mirror 2.0 mm thick when the half-inch version is 6.0 mm? Thickness scales with diameter in this family. The Ø7.0 mm items are 2.0 mm, the Ø1/2 inch and Ø1 inch items are 6.0 mm and the Ø2 inch item is 12.0 mm. The thin substrate is what allows the compact MK7 and LMR7 mounts, and the λ/10 figure is specified on that 2.0 mm substrate.
How much laser power can it take? The published values are 0.225 J/cm² at 800 nm with 99 fs pulses at 1 kHz, 1 J/cm² at 1064 nm with 10 ns pulses at 10 Hz, and continuous ratings of 500 W/cm at 1.07 µm and 1500 W/cm at 10.6 µm. Compare your own energy density or linear power density with the figure for your pulse length, and remember that dust and fingerprints lower the threshold far more than the coating specification does.
How should a silver mirror be handled and stored? With gloves, by the rim, and never by the coated face. Silver is the most environment-sensitive of the protected metal films: fingerprints, abrasive contact and humid or hot storage all degrade the overcoat and let the silver oxidise underneath. Keep it at room temperature with minimal humidity, blow loose dust off with clean dry gas rather than wiping it, and accept that a contaminated silver mirror is usually replaced rather than cleaned.
Disclaimer
Specifications on this page are compiled from Thorlabs official published material and are provided as a selection reference only. The current official specification sheet governs; specifications and appearance may change without notice. Commercial terms and lead time are quoted by our sales team on request. Reproduction of this page without written permission is not permitted.
Contact Us
Changsha Soar Laser Equipment Co., Ltd. supplies genuine Thorlabs optics to laboratories and machine builders. For coating selection, aperture sizing, mount matching or lead time on a specific part number, contact us: hotline +86 159 2722 0467, email 859818709@qq.com, or use the enquiry form on www.soar-laser.cn. Tell us the wavelength, the beam diameter at the mirror and the pulse energy or continuous power, and we will confirm whether this coating is the right one before you order.









Reviews
There are no reviews yet.