Description
Product Overview
This is the 10-piece pack of the PF05-03-M03; the optic is identical to the single-unit version. One carton, ten mirrors, one line on the purchase order, and a per-piece price below the single-unit listing because the optics travel as one shipment. Every figure that governs the film, the figure, the polish and the laser rating is the one published for the single mirror, so nothing about the optical design changes when the quantity does. What does change is commercial and procedural, and both are worth reading before the carton is opened.
Ten is not a marketing number. Count the half-inch folds in a small CO2 delivery bench: a periscope pair to lift the beam, two 45 degree turns into the gantry, one fold at the focus head, one on the return leg. That is six before the second head in build is counted, and before a spare set sits on the shelf. Ordering singles means the eleventh mirror halts a commissioning for a lead time that is short but never zero. A pack turns that interruption into shelf stock, and it does so at a unit price the single-unit listing cannot match.
The awkward part of buying ten at once is that the property which makes the coating attractive is the property that makes it fragile. Bare gold carries the highest CW figure in the gold family, 1000 W/cm at 10.6 µm over Ø1.18 mm, and it carries it precisely because no dielectric layer sits on top of the metal. The same absence removes every cleaning option: no solvent, no lens tissue, no drag wipe, nothing beyond clean dry air or nitrogen blown across the face. Ten mirrors means ten times the handling events, and that discipline does not get cheaper with volume.
Thorlabs attaches a warning that lands squarely on pack users: mounts that hold an optic with a retaining ring are likely to damage the surface. On a bare gold mirror the ring seats on the coated annulus just outside the 90% clear aperture and abrades it every time the optic is inserted or removed. Use a mount that grips the barrel or the edge, and reserve retaining-ring mounts for protected coatings.
Each of the ten is laser engraved on the back with its item number, so a mirror pulled from a mount for inspection can be identified without a label that has already fallen off. Between uses the pack stays closed and dry, and a mirror never goes back into the carton held in a bare hand.
Key Features
- Ten identical optics per carton: the PF05-03-M03 specification applies to every piece, so a build that consumes several does not need a second qualification run
- Bare gold at 97% average from 800 nm to 20 µm, with no overcoat to absorb in the thermal infrared or to add dispersion to a short pulse
- Highest CW figure of the gold coatings: 1000 W/cm at 10.6 µm over Ø1.18 mm, which is why this film ends up in CO2 delivery benches
- Pulsed rating of 4 J/cm² at 10.6 µm, 100 ns, 1 Hz over Ø0.435 mm
- Figure and finish held at pack scale: λ/10 peak to valley at 633 nm, 40-20 scratch-dig, parallelism inside 3 arcmin, clear aperture 90% of the diameter
- Engraved item number on every back face, so a mirror in a mount is still traceable after its packaging is gone
- One cleaning method only: clean dry air or nitrogen, no solvent and no contact, stated by the manufacturer rather than inferred by us
- Not compatible with retaining-ring mounts, which abrade the coated annulus outside the clear aperture
Technical Specifications
| Parameter | Value |
|---|---|
| Model | PF05-03-M03-10 |
| Coating | Unprotected gold, no dielectric overcoat |
| Wavelength range | 800 nm – 20 µm |
| Average reflectance | 97% from 800 nm to 20 µm |
| Substrate | Fused silica |
| Diameter | 12.7 mm (Ø1/2 inch) |
| Diameter tolerance | +0.0 mm / -0.1 mm |
| Thickness | 6.0 mm (0.24 inch) |
| Thickness tolerance | ±0.2 mm |
| Front surface flatness | λ/10 peak to valley at 633 nm |
| Surface quality | 40-20 scratch-dig |
| Parallelism | 3 arcmin or less |
| Clear aperture | 90% of the diameter |
| Damage threshold, pulsed | 4 J/cm² at 10.6 µm, 100 ns, 1 Hz, Ø0.435 mm |
| Damage threshold, CW | 1000 W/cm at 10.6 µm, Ø1.18 mm |
| Pack size | 10 mirrors per carton |
| Marking | Item number laser engraved on the back face |
| Cleaning | Blow off dust with clean, dry air or nitrogen; no other method |
| Mounting note | Retaining-ring mounts are likely to damage the coated surface |
| Source | Thorlabs official series specification table |
Applications
This part number is bought by people who already know the coating is right and are solving a supply problem. The applications below are the ones where a ten-piece carton is the natural unit rather than an indulgence.
- Commissioning spares for a CO2 cell: a set that travels with the installation team so a contaminated fold does not turn a two day site visit into a two week one
- Multi-head production gantries: three or four marking or drilling heads on one frame each need their own fold train, and the counts add up faster than the budget cycle does
- Field service kits: a sealed case of ten lets a service engineer replace a damaged fold on site, where no cleanroom and no spare stock exist
- Teaching and training benches: student optical benches lose mirrors to fingerprints, and a carton of ten is the cheapest way to keep a lab session running
- Incoming inspection reference set: one mirror kept sealed as a reflectance reference, the rest released to the line, so a suspect optic can be compared against a known-good face
- OEM pilot runs: a first build of five to ten units consumes a carton before the production order is placed, which is exactly the quantity this pack covers
Selection Guide
The first question is not which coating but how many folds the project actually has. Work the count honestly, including the head still on the drawing board and the spare nobody wants to order later.
| Buy | When it fits | Trade-off |
|---|---|---|
| PF05-03-M03 (single) | One or two folds, or a first prototype where the coating is still being proven | Cheapest entry, but the second mirror is another order and another wait |
| PF05-03-M03-10 (this pack) | Three or more bare gold folds, a service kit, or a build with a spare policy | Ten times the handling discipline, all of it landing on whoever mounts the optics |
| PF05-03-M01-10 (protected gold) | The same fold count in a bay where the optics will be handled, wiped or exposed to aerosols | Gives up one point of average reflectance and adds overcoat dispersion |
If the answer is “we will clean them when they get dirty”, the pack is the wrong purchase and the protected gold PF05-03-M01-10 is the right one, because nothing in this carton can be cleaned. If the count is two, buy two singles and keep the handling exposure low. The full optical argument for bare gold, including why anyone accepts a surface that cannot be wiped, sits on the single-unit PF05-03-M03 page and is not repeated here.
Series Comparison
Thorlabs sells four of its half-inch metal coatings as ten-piece packs. The table shows which, so a buyer comparing cartons is comparing like with like.
| Half-inch pack | Coating | Band | Average reflectance | Wipeable |
|---|---|---|---|---|
| PF05-03-M03-10 | Unprotected gold | 800 nm – 20 µm | 97% | No |
| PF05-03-M01-10 | Protected gold | 800 nm – 20 µm | 96% | Yes |
| PF05-03-P01-10 | Protected silver | 450 nm – 20 µm | 97% below 2 µm, 95% above | Yes |
| PF05-03-G01-10 | Protected aluminum | 450 nm – 20 µm | 90% below 2 µm, 95% above | Yes |
The MIR-enhanced gold coating is not offered as a half-inch pack, so a 2 µm to 20 µm build that wants carton pricing has to fall back to this part or to protected gold. Within the pack range, this is the only carton whose contents cannot be cleaned, which is the single fact a purchasing decision has to survive.
FAQ
Is the optic inside the carton the same as a single PF05-03-M03? Yes. Same substrate, same film, same figure, same polish, same laser rating. The pack is a packaging and pricing decision, not a product variant.
Does buying ten lower the price per mirror? It does, and that is the stated reason Thorlabs offers the packs. We quote against live stock, so the exact figure moves with exchange rate and freight; ask for a current quotation rather than working from a list price.
Can one mirror from the carton be swapped for a protected gold part? Not from a sealed pack. The packs are fixed contents. If a build needs a mixed set, order the single part numbers and we will combine them on one quotation.
Why does Thorlabs warn about retaining rings? Because the ring bears on the coated annulus outside the 90% clear aperture. On a protected coating that is a cosmetic mark; on bare gold it is removal of the film. Use an edge-grip or barrel-grip mount for the whole carton.
What if one of the ten is contaminated? Blow it off with clean dry air or nitrogen and inspect it. If the contamination does not lift, the mirror is out of service. There is no recovery step, no solvent, no wipe, and no repair, which is the cost of the extra point of reflectance.
How should the carton be stored? Closed, dry, at room temperature, away from solvents and aerosols. The mirrors do not oxidise, so shelf life is not the issue; airborne droplets settling on ten exposed faces are.
Usage Precautions
- Handle only when necessary, always by the edge, with latex gloves or an equivalent finger covering; a fingerprint is permanent damage on this film
- Never wipe, drag, rinse, vapour clean or ultrasonically clean any mirror from this pack; the only permitted action is blowing off dust with clean dry air or nitrogen
- Do not use a retaining-ring mount; the ring abrades the coated annulus each time the optic is seated
- Keep the carton closed between uses and never return a mirror to it held in a bare hand
- Do not store the pack near solvent bottles, aerosol cans or machining coolant mist
- The published laser ratings are quoted at 10.6 µm; assess any other wavelength from beam diameter and pulse duration rather than reading the table across
Disclaimer
Specifications on this page are transcribed from the Thorlabs unprotected gold mirror specification table and from the Thorlabs optics multipack table for selection purposes. The official datasheet in force at the time of purchase governs, and the manufacturer may revise figures, marking or packaging without notice. The handling requirements are quoted from the manufacturer and are not optional; damage caused by cleaning, contact or a retaining-ring mount is not a manufacturing defect. Commercial terms, pack availability and lead time are quoted by our sales team against live stock.
Contact Us
Changsha Soar Laser Equipment Co., Ltd. supplies genuine Thorlabs optics to laboratories and machine builders in China. Before a carton is ordered it is worth one short exchange: tell us how many folds the system has, whether anyone will ever touch them, and what the wavelength and power are, and we will say plainly whether ten bare gold mirrors is a sensible purchase or whether the protected coating should take the handling instead. Hotline +86 159 2722 0467, email 859818709@qq.com, website www.soar-laser.cn.








Reviews
There are no reviews yet.