QQ: 859818709

ZBTK 30G-FB2 High-Power Welding Galvo System, 30 mm, Digital Closed Loop

ZBTK 30G-FB2 High-Power Welding Galvo System, 30 mm, Digital Closed Loop

Price on request
Category:

Description

Product Overview

The ZBTK 30G-FB2 digital closed-loop high-power welding galvo system is a digital closed-loop high-power welding galvo system from Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK). The clear aperture is 30 mm and the unit is optimised for laser welding applications, with maximum laser power up to 4000 W and water cooling that keeps long high-power runs stable and reliable. Digital closed-loop control with high-precision encoder feedback delivers sub-microradian positioning accuracy and very low thermal drift, meeting the demanding seam-position accuracy and repeatability of precision welding. Welding speed reaches up to 2.5 m/s, and with collimating lenses (F100/F120/F150) and focusing lenses (F210/F254/F330/F420) a wide range of seam forms can be processed flexibly.

Key Features

⚡ High-Speed Welding Scanning

Welding scan speed reaches up to 2.5 m/s and positioning speed 8 m/s, with a tracking error of only 0.40 ms. The optimised servo control algorithm keeps trajectory accuracy very high even during high-speed oscillating welding, so seam uniformity and consistency are far better than with conventional robotic-arm welding. High-speed jumps and transition delays are minimal, which shortens cycle time and raises line throughput. Stable, reliable high-speed processing is achieved for both continuous seam and spot welding processes.

🎯 High-Precision Positioning

Repeatability (RMS) is under 1 μrad and non-linearity under 0.3 mrad. High-resolution digital encoder position feedback and closed-loop control remove the drift and hysteresis errors inherent in open-loop systems, with gain drift under 15 ppm/K, zero drift under 10 μrad/K and 8-hour drift under 0.03 mrad (after a 30-minute warm-up). Precision optical sensors and advanced automatic thermal-drift compensation keep positioning stability and process consistency excellent during long, uninterrupted operation.

🌡️ Ultra-Low Thermal Drift

Fine photoelectric sensor technology and an advanced automatic thermal-drift compensation algorithm effectively overcome the thermal drift of the scanner. Zero-point thermal drift is only under 10 μrad/K, gain thermal drift under 15 ppm/K and 8-hour long-term drift under 0.03 mrad, which meets the stability requirements of most long, high-volume marking and welding applications. Process consistency is maintained even with ambient temperature swings of ±10 °C.

🔧 High-Torque Permanent-Magnet Galvo Motor

A ZBTK high-torque galvo motor dedicated to welding is used, with rotor inertia and torque constant matched by design so that even with the load of 30 mm large-aperture mirrors it still achieves a 0.40 ms fast tracking response and 2.5 m/s welding speed. The motor uses a high-temperature design and an efficient heat-dissipation structure, so performance does not degrade over long high-power runs.

📡 Digital Servo Driver Board

The FB2 digital closed-loop servo driver board integrates a high-speed DSP and high-resolution A/D conversion for real-time encoder signal acquisition and closed-loop servo regulation. The board supports multiple protection functions, including over-current protection, over-temperature protection and position deviation alarms, keeping the scanner system safe and reliable under all operating conditions.

🔌 Interface Compatibility

The system supports the XY2-100 and SL2-100 standard communication protocols. SL2-100 provides 20-bit digital resolution (0.76 μrad) and XY2-100 provides 16-bit resolution (12 μrad). It is compatible with most laser control cards on the market (such as the JCZ EZCAD series, SCANLAB RTC series and RAYLASE SP-ICE series), for plug-and-play use and efficient system integration. Power supply: ±15 V / 5 A; shielded interface cables effectively suppress external electromagnetic interference.

❄️ Efficient Cooling

This product is water cooled. The water circuit covers the core heat zones, including the mirror mount and the beam entrance aperture, which controls lens temperature rise and prevents spot drift and focus shift caused by thermal lensing. Under high-power, long continuous operation the water cooling keeps the scanner at its optimum working temperature and preserves process consistency.

🛡️ Intelligent Monitoring and Protection

The welding galvo system has a comprehensive fault monitoring and alarm system that detects abnormal power supply, abnormal motor operation, driver board faults, cable connection faults, abnormal core-zone temperature and protective window faults in real time. The system can actively cut the laser circuit and notify the welding control card to stop the process, preventing defective parts from reaching downstream operations and safeguarding production. The digital closed-loop version also supports encoder signal read-back and position deviation monitoring, further improving system reliability and maintainability.

Detailed Specifications

Optical Parameters
Clear Aperture 30 mm
Scan Angle ±0.35 rad
Max Laser Power 4000 W
Mirror Reflection Wavelength 1030~1090 nm
Collimating Lens F100/F120/F150
Focusing Lens F210/F254/F330/F420
Scanning Parameters
Non-linearity under 0.3 mrad
Tracking Time 0.40 ms
Repeatability (RMS) under 1 μrad
Welding Speed under 2.5 m/s
Positioning Speed under 8 m/s
Gain Drift under 15 ppm/K
Zero Drift under 10 μrad/K
8-Hour Drift (after 30-min warm-up) under 0.03 mrad
Electrical Parameters
Power Supply ±15 V / 5 A
Input Signal Protocol XY2-100 / SL2-100
Cooling Water cooled
Mechanical Parameters
Operating Temperature 25 ± 10 °C
Dimensions (L × W × H) 195 × 150 × 171 mm
Weight 5.8 kg

Operating Principle

A laser galvo scanning system is a high-precision beam positioning device based on electromagnetic deflection. Two orthogonally mounted galvo motors drive the X-axis and Y-axis mirrors independently, steering the incoming laser beam to any point on the working plane and forming a two-dimensional scan field. A galvo motor is essentially a limited-angle servo motor: when the driver board feeds control current into the motor coil, electromagnetic torque drives the rotor and mirror to the commanded angle, while a position sensor measures the rotor angle in real time and closes the servo loop against the commanded position. A digital closed-loop scanner replaces the conventional analog position detector with a high-resolution encoder: the encoder reads the rotor angle directly and feeds it back to the digital servo driver board, forming a fully digital closed loop that fundamentally removes the noise, drift and hysteresis inherent in analog detection, and delivers sub-microradian positioning accuracy with long-term stability. Scan speed depends on the dynamic response of the motor, and tracking time (tracking error) characterises how far the scanner lags the command signal, which makes it the key metric for high-speed performance.

Applications

Laser Welding

Suitable for precision welding of stainless steel, carbon steel, aluminium alloy and copper alloy, covering spot welding, seam welding, tailor welding and overlap welding; the seam is well formed, the heat-affected zone is small and welding speed is high.

New Energy Vehicles

Used for welding power battery cells, battery module busbars and motor stators and other core new-energy vehicle components, meeting high safety and high consistency requirements.

3C Electronics

Suitable for welding phone mid-frames, notebook housings and connectors and other precision electronic parts; welds are fine, deformation is small and the needs of miniaturised processing are met.

Aerospace

Used for repair welding of aero-engine blades, welding of titanium alloy structural parts and other high-end applications, with reliable weld quality that meets stringent industry standards.

Medical Devices

Suitable for welding medical catheters, stents and surgical instruments, with high seam cleanliness that meets medical-grade quality requirements.

Hardware Products

Used for automated welding of kitchen and sanitary hardware, locks and valves, with high welding efficiency and good consistency that significantly reduce labour costs.

Power and Electrical

Suitable for welding transformer copper busbars, switchgear busbars and electrical contacts, with good weld conductivity and low contact resistance.

Selection Guide

When choosing a welding galvo, first size the clear aperture from laser power: 14 mm is suitable up to 1500 W, 20-30 mm is recommended for 1500-3000 W, and above 3000 W a large aperture of 33 mm or more is needed. Then choose the scanner model from the welding speed requirement: the 30G standard series for conventional welding, the 30BS high-speed series for high-speed welding, and the 30G-FB2 digital closed-loop series where precision welding demands high repeatability and low drift. For ultra-high-power welding (above 6000 W), the LHP33-FB2 is the first choice. A welding galvo must be water cooled, and the f-theta focal length should be selected from the seam width and working distance together.

Series Comparison

Model Clear Aperture Max Power Welding Speed Repeatability Control Cooling Reference Price
14AW-III-Pro-SQU 14 mm 1500 W under 2 m/s under 2 μrad Open loop Water cooled On request
S20GW-Pro-QU 20 mm 2000 W under 2.5 m/s under 2 μrad Open loop Water cooled On request
30G 30 mm 4000 W under 2.5 m/s under 2 μrad Open loop Water cooled On request
30BS 30 mm 3000 W under 3 m/s under 2 μrad Open loop Water cooled On request
30G-FB2 30 mm 4000 W under 2.5 m/s under 1 μrad Digital closed loop Water cooled On request
30GH-SYS 30 mm 4000 W under 2.5 m/s under 2 μrad Open loop Water cooled On request
30GH-FB2-SYS 30 mm 3000 W under 3 m/s under 1 μrad Digital closed loop Water cooled On request
LHP33-FB2-SYS 33 mm 12000 W under 2 m/s under 1 μrad Digital closed loop Water cooled On request

About the Brand

Shenzhen Zhibotaike Technology Co., Ltd. (ZBTK) is a leading Chinese manufacturer of laser galvo scanners with more than ten years of galvo development and production experience. Its range covers 2D scanning galvos, 3D dynamic-focus galvos, welding galvos and OCT galvo motors, and the products are widely used in laser marking, welding, cutting, 3D printing and medical aesthetics. ZBTK scanners are known for cost-effectiveness and stability, can replace comparable imported products, and enjoy a solid reputation in China’s laser industry.

Contact Us

For more product information, a quotation or technical advice, please contact us:

📞 Hotline: +86 159-2722-0467

🌐 Website: www.soar-laser.cn

We provide professional galvo scanner selection advice and complete system integration solutions. You are welcome to call us.

Reviews

There are no reviews yet.

Be the first to review “ZBTK 30G-FB2 High-Power Welding Galvo System, 30 mm, Digital Closed Loop”

Your email address will not be published. Required fields are marked *

中文EN