What Is Photodarkening? Why Optical Fibre Turns Dark and Fails
Table of Contents
- 1. What Is Photodarkening? Understanding the Core Concepts
- 2. Working Principle: How Does Photodarkening Work?
- 3. Key Parameters: Understanding Photodarkening Performance Indicators
- 4. Main Types: What Kinds of Photodarkening Exist?
- 5. Effects and Applications of Photodarkening
- 6. Common Misconceptions
1. Core Concepts: What Is Photodarkening?
Photodarkening, also called the photodarkening effect, photo-induced coloration damage or photo-induced absorption, refers to the phenomenon in which the transmission loss of a transparent optical material gradually increases under illumination at a specific wavelength. Simply put, the material becomes darker the more it is illuminated—its transmittance keeps dropping.

Photodarkening is a very important degradation mechanism in laser materials and optical fibres, directly affecting the long-term stability and lifetime of lasers. For high-power fibre lasers and amplifiers, photodarkening is one of the key factors limiting device lifetime. The essence of photodarkening is usually that illumination creates so-called colour centres inside the material—that is, crystal defects. These defects introduce extra optical absorption levels, causing new absorption bands in an originally transparent material, making it appear to have “darkened.”
2. Working Principle: How Does Photodarkening Work?
1. Basic concepts of colour centres
A colour centre is a class of point defect in a crystal that introduces extra energy levels into the material’s band gap. These levels allow photons whose energy is below the band gap and would normally not be absorbed to be absorbed by the defect—so new absorption bands appear in an originally fully transparent material, giving it a colour (hence the name “colour centre”).

2. Common mechanisms of photodarkening
1. UV-induced photodarkening: UV photons have high energy and can directly break chemical bonds or ionize atoms, creating colour centres. For example, silica fibre’s loss rises rapidly under UV illumination. This darkening is especially pronounced in germanium-doped silica fibre, involving a two-photon absorption process. 2. Photodarkening in rare-earth-doped fibre (taking Yb-doped silica fibre as an example): this is the type of photodarkening of greatest concern for industrial high-power fibre lasers. Its characteristics are: loss increase is strongest at short wavelengths (visible light) but is also significant in the 1 μm laser operating band; the darkening rate is proportional to the seventh power of the excited-state ytterbium ion density—a very strong nonlinear relationship, meaning that a slight rise in excitation density sharply accelerates darkening; high doping concentration and ion clustering significantly worsen photodarkening; the formation of Yb²⁺ ions is currently thought to relate to colour-centre generation, but the complete physical mechanism is not yet fully understood. 3. Photo-induced absorption in nonlinear crystals: nonlinear crystals such as KTP and lithium niobate show “grey tracking” or “green-induced infrared absorption (GRIIRA)” under green or blue illumination. This is also a form of photodarkening, related to the formation of polarons (electrons trapped by defects). In frequency doublers and optical parametric oscillators, this effect reduces conversion efficiency and causes thermal lensing. 4. Photodarkening in chalcogenide glass fibre: the chemical bonds in chalcogenide glasses (such as As₂S₃ and As₂Se₃) are easily reconfigured, so even ambient light or visible alignment light can cause marked photodarkening.
3. Reversibility of photodarkening
Some photodarkening is reversible, some permanent. In some cases heating (thermal annealing) or illumination at a specific wavelength can partially or fully remove the darkening and restore the material’s transparency. For example, photodarkening in Yb-doped fibre can be partly reversed by heating or UV illumination.
3. Key Parameters: Understanding Photodarkening Performance Indicators
The core parameters are described below:
| Parameter Name | Meaning | Why It Matters |
|---|---|---|
| Darkening Rate | The amount of loss increase per unit time, usually expressed in dB/m/hour or similar units. A higher rate means faster material degradation. | Directly affects the lifetime and long-term stability of fibre lasers. A faster darkening rate means faster output-power decay, and in severe cases can lead to irreversible fibre failure. |
| Saturation Loss | Photodarkening does not increase without bound; it eventually reaches a saturation value. The saturation loss determines the final degree of performance degradation. | The loss value at which photodarkening stabilizes and stops increasing. A lower saturation loss means less final power loss from darkening and more stable long-term device performance. |
| Excitation-Density Dependence | The relationship between darkening rate and excitation density (such as a seventh-power relationship), which determines the safe operating range. | How strongly the darkening effect changes with optical power density. A stronger dependence means worse darkening at high power, limiting the power-scaling headroom of fibre lasers. |
| Spectral Shape | How the extra absorption caused by darkening varies with wavelength. Different mechanisms of darkening have different spectral signatures. | The absorption-spectrum shape of photodarkening determines its impact on lasers at different wavelengths. Wavelengths with stronger absorption suffer greater darkening loss and more obvious output-power drop. |
| Reversibility | Whether darkening can be recovered by heat treatment or illumination, and the degree and speed of recovery. | Whether the darkening effect can be restored by heat treatment or similar means. Reversible darkening can be recovered by periodic annealing, while irreversible darkening causes permanent loss. |
| Photodarkening Resistance | The ability of different material formulations to resist photodarkening. Phosphate glass, phosphosilicate glass and co-doping with cerium have all been shown to improve darkening resistance. | Determines the long-term reliability and lifetime of fibre lasers. Stronger resistance means slower output-power decay, longer device life and greater importance for high-power continuous-operation scenarios. |
4. Main Types and Mechanisms of Photodarkening
Photodarkening takes different forms and arises by different mechanisms in different material systems. It is classified below by material system and by physical mechanism:
By Material System
| Type | Typical Material | Main Trigger | Core Feature |
|---|---|---|---|
| Silica-fibre darkening | Ge-doped silica fibre | UV or blue illumination | Two-photon absorption mechanism, improvable with F doping, closely tied to FBG writing |
| Yb-doped fibre darkening | Yb-doped silica fibre | 9xx nm pumping, high excitation density | Proportional to the seventh power of excitation density, affects the 1 μm band, Yb²⁺ colour-centre hypothesis |
| Tm-doped fibre darkening | Tm-doped silica/fluoride fibre | High-power pumping, upconversion processes | Especially prominent in fluoride-fibre upconversion lasers |
| Nonlinear-crystal grey tracking | KTP, LiNbO₃, etc. | Green/blue illumination | Reversible, also called GRIIRA or grey tracking, affects frequency-doubling efficiency |
| Chalcogenide-glass darkening | (chalcogenide glasses) | As₂S₃, As₂Se₃ | Visible light, short-wavelength pumping |
| Chemical-bond reconfiguration mechanism, extremely high sensitivity | AgBrCl polycrystalline fibre | Visible illumination | Forms metallic silver colloidal particles, increasing scattering loss |
By Physical Mechanism
Colour-Centre Photodarkening
The most common type. Point defects (colour centres) cause extra optical absorption bands. In crystals, colour centres can take forms such as F centres (an electron occupying an anion vacancy), F⁺ centres and F₂ centres; in glasses they are constituted by non-bridging oxygen hole centres (NBOHC), oxygen deficient centres (ODC), etc. UV light and high-energy radiation are the main triggers.
Valence-Change Photodarkening
The charge state of active ions changes. A typical example is the Yb³⁺→Yb²⁺ transition in Yb-doped fibre—under high excitation density a trivalent ytterbium ion gains an electron and becomes divalent; Yb²⁺ ions have a broad visible absorption band, increasing fibre loss in the visible and near-infrared bands.
Structural-Change Photodarkening
The material’s chemical bonds or network structure are reconfigured. Especially pronounced in chalcogenide glasses—their bond energies are low, so even visible light can break and rearrange bonds, changing the material’s optical properties.
Metallic-Colloid Photodarkening
In materials containing metal ions (such as silver-halide fibre or glass doped with gold/silver nanoparticles), illumination reduces the metal ions, which aggregate into nanoscale colloidal particles, producing extra absorption and scattering through surface plasmon resonance.
5. Effects and Applications of Photodarkening
Photodarkening is studied more as a negative effect to avoid or suppress, but it also has some positive applications:
6. Common Misconceptions
Here are a few common misconceptions:
Misconception 1: ‘Photodarkening is the material being burned.’
photodarkening and thermal damage are completely different mechanisms. Darkening usually occurs at light power far below the material’s damage threshold; it is a photochemical process (creating colour centres, valence changes, etc.), not thermal ablation. Of course, the increased absorption from darkening causes more heating, indirectly accelerating thermal damage
Misconception 2: ‘Photodarkening is permanent and irreversible.’
not necessarily. Some darkening is permanent, some reversible. For example, grey tracking in KTP crystals fades by itself within hours after illumination stops; photodarkening in Yb-doped fibre can be partly recovered by heating or illumination at a specific wavelength. But under normal industrial operating conditions, recovery is very slow and can be approximated as permanent degradation
Misconception 3: ‘Photodarkening only affects short-wavelength light.’
although the absorption peak of darkening is usually in the visible or UV band, the tail of the absorption band extends into the near-infrared and even mid-infrared. For a Yb-doped fibre laser operating at 1 μm, the extra loss at 1 μm due to darkening, though not the largest, is still enough to seriously affect efficiency and lifetime
Misconception 4: ‘Lowering the power reduces photodarkening linearly.’
quite the opposite: the darkening rate is usually highly nonlinear in light intensity. In Yb-doped fibre the darkening rate is proportional to the seventh power of excitation density—meaning that doubling the excitation density makes darkening 128 times faster. Therefore, staying within a reasonable operating range is critical: exceed it slightly and lifetime drops sharply
Misconception 5: ‘All rare-earth-doped fibres have the same photodarkening problem.’
darkening characteristics vary greatly by ion and host. For example, Er-doped silica fibre darkens far less severely than Yb-doped; phosphate and phosphosilicate glasses are much more resistant than pure silicate glass; co-doping with cerium has also been shown to significantly improve Yb-doped fibre’s resistance



Leave a Reply