Photodiode Selection Guide: From Principles to Practice — Choose the Right DetectorThe photodiode is the core optoelectronic conversion device in laser detection, spectral analysis, optical communications and related fields. Facing hundreds of Thorlabs photodiode products, many customers ask: Should I choose Si or InGaAs? How large should the active area be? Do I need amplification? Starting from the basic principles and combined with real application scenarios, this article helps you sort out your selection logic. 1. Basic Principles of the PhotodiodeA photodiode uses the photoelectric effect of a semiconductor PN junction to convert an incoming optical signal into a current signal. When the photon energy exceeds the bandgap of the semiconductor material, photons are absorbed and generate electron-hole pairs, forming a photocurrent under either a reverse bias voltage or zero bias. Key performance parameters include:
2. Choose the Material by Wavelength: Si / InGaAs / Ge / InGaAs(Ext)A photodiode’s material determines the wavelength range it can detect — this is the first step in selection:
Key principle: determine your working wavelength first, then choose the detector material accordingly. If the wavelength falls outside a material’s response range, the detector will output almost no signal. 3. How to Choose the Active Area Size?The active area determines how large a spot the detector can receive:
For example: FGA01 (InGaAs, 0.007mm²) suits fiber-coupled small-spot high-speed detection; FDS100 (Si, 10×10mm²) suits large-area power measurement. 4. Bare Photodiode vs. Mounted vs. Amplified Detector
5. Frequently Asked Questions (FAQ)Q1: Does a photodiode need a bias voltage? A: It depends on the application. Zero bias (photovoltaic mode) gives low noise but slow response; reverse bias (photoconductive mode) improves response speed and linearity but increases dark current. Most high-speed applications should apply a bias. Q2: What does the CAL version mean? A: CAL = Calibrated, meaning the model comes with an NIST-traceable calibration certificate providing accurate responsivity data. It suits scenarios requiring precise power measurement, such as FDS100-CAL and FGA21-CAL. Q3: Both InGaAs and Ge detectors cover 800-1700nm — how to choose? A: InGaAs offers higher responsivity at 1310nm and 1550nm (about 0.9 A/W vs. about 0.6 A/W for Ge), lower dark current, and better overall performance at a higher price. Ge detectors cost less and suit applications with less demanding accuracy. Q4: How fast does the rise time need to be? A: Rise time determines the highest frequency the detector can respond to. A rough estimate: bandwidth ≈ 0.35 / rise time. For example, a 17ns rise time corresponds to about 20MHz bandwidth. If your signal modulation frequency exceeds that value, you need a faster detector. Q5: How do I connect a photodiode to an oscilloscope? A: A bare photodiode needs a transimpedance amplifier to convert the current into a voltage signal. If you do not want to design your own circuit, choose a PDA-series amplified detector — the built-in amplifier outputs via BNC directly to the oscilloscope. 6. Selection Workflow Summary
If you still have questions, feel free to contact our technical support team at 15927220467, or email 859818709@qq.com — we will recommend the most suitable model for your specific application. |



Leave a Reply