Properties and Challenges of Polycarbonate
Polycarbonate (PC) is a thermoplastic in extremely high global demand. Its advantages include: high toughness (excellent impact resistance), high strength, high transparency, and heat resistance. These properties make PC widely used in automotive headlamps, medical devices, electronic displays, and other fields.
However, PC processing faces challenges: it is difficult to cut mechanically (high toughness), cutting with the standard 10.6µm wavelength causes edge yellowing/browning, and the requirements for cut-edge quality are stringent.
Advantages of the 9.3µm Wavelength
FTIR spectrometer tests show that PC has a strong absorption peak at 1080 cm⁻¹, corresponding to a wavelength of about 9.26µm. The advantages of using the 9.3µm wavelength: higher absorption, energy used directly for material removal, less heat spreading into the surrounding area, and cleaner cut edges.
Process Parameter Optimization
1. Assist Gas Pressure
The gas pressure must be ≥4 bar. Above 4 bar, the molten material can be effectively blown out of the kerf.
2. Laser Frequency
In high-frequency quasi-continuous-wave mode (30-50 kHz), the material vaporizes continuously, the molten material can be removed continuously, and the cut edges are cleanest.
3. The Influence of Material Type
Standard-grade and UV-stabilized PC can be cut nearly perfectly with the correct parameters. Flame-retardant PC requires process adjustments because of its different additives.
Recommended Optimal Process Parameters
| Parameter | Recommended Value |
|---|---|
| Wavelength | 9.3µm |
| Laser power | 75-150W (standard configuration) |
| Pulse frequency | 30-50 kHz (quasi-CW) |
| Assist gas | Air or nitrogen |
| Gas pressure | ≥4 bar |



Leave a Reply