Introduction
In laser processing, selecting the right wavelength is the first factor in ensuring processing quality. Different materials differ enormously in how strongly they absorb different wavelengths; choosing the correct wavelength can raise processing speed by 2-4x while producing cleaner cut edges and a smaller heat-affected zone.
Why Is Wavelength So Important?
Every material has its own absorption spectrum — light at certain wavelengths is absorbed more readily by the material. Pairing the laser wavelength with a material that absorbs it well yields higher processing quality, faster processing speed, and a smaller heat-affected zone (HAZ).
The Three CO2 Laser Wavelengths Explained
10.6µm — The Universal Wavelength
This is the most commonly used CO2 laser wavelength, suitable for marking, engraving, and cutting most common materials. Applicable materials include wood, paper, textiles, ceramics, polymers, and certain metals.
10.2µm — Dedicated to Polypropylene
Applicable materials: OPP film (oriented polypropylene), CPP film, glossy paperboard, and BOPP film. Typical applications: food packaging, beverage bottle labels, and pharmaceutical packaging. Cutting and perforating speed can improve by 2.5-4x.
9.3µm — Dedicated to High-End Plastics
Applicable materials: PET (polyester), polyimide (Kapton), polycarbonate (PC), FR4/PCB, Pebax plastic, and LCD polarizer film. It produces a frosted-white effect, ideal for permanent date codes and batch marking.
Wavelength Selection Quick Reference Table
| Material | Recommended Wavelength | Improvement |
|---|---|---|
| PET bottles/film | 9.3µm | Frosted effect, no perforation |
| OPP/CPP/PP film | 10.2µm | 2.5-4x speed |
| Polycarbonate (PC) | 9.3µm | Reduced yellowing |
| Kapton/PI film | 9.3µm | Reduced carbonization |
| Glossy paperboard | 10.2µm | Higher contrast |
| General materials | 10.6µm | Standard configuration |
How to Choose the Right Wavelength?
- Identify the material type
- Check the absorption spectrum
- Consult experts
- Run actual tests
Summary
Wavelength selection is the first step in CO2 laser processing. Keep the following principles in mind: 10.6µm is the universal first choice; 10.2µm suits polypropylene-type films; 9.3µm suits high-end plastics such as PET, PC, and Kapton.



Leave a Reply