1. Thin-Film Cutting — Consumer Electronics
Display manufacturing for smartphones, tablets, and other consumer electronics involves large amounts of thin-film materials. The Synrad vi30+ 30W CO2 laser is optimized for thin-film cutting, with power stability from cold start <5% and M²<1.2.
2. Hairpin Stator Insulation Removal — Automotive Motors
New energy vehicle drive motors use Hairpin (hairpin-shaped) stator windings. The Novanta dual-wavelength scan head offers an innovative solution: CO2 laser (10.6µm) + fiber laser (1064nm) working together, fully removing the insulation layer and raising throughput by more than 40%.
3. Orthotics Laser Marking — Medical Devices
Cascade DAFO uses a Synrad CO2 laser marking system to permanently mark the surface of thermoplastic orthoses, meeting FDA medical device traceability requirements and enabling personalized customization.
4. Optical Store Display Stands — Large-Format Processing
The Synrad i401 400W CO2 laser is used for large-format acrylic cutting with a work area of 2m×3m. It can cut acrylic, wood, MDF, plywood, and fabric with perfect edge quality and no secondary processing required.
5. Packaging Industry
OPP film cutting: using the 10.2µm wavelength, speed improves by 2.5-4x with clean edges. Glossy paperboard marking: the 10.2µm wavelength delivers higher contrast.
Summary
From 30W to 400W, from thin films to large formats, CO2 lasers remain a reliable partner in industrial manufacturing. Core value: non-contact processing with no mechanical stress, high precision and good consistency, the flexibility to process many kinds of materials, and simple maintenance with low operating costs.



Leave a Reply