Challenges of Thin-Film Processing
Thin-film materials (PET, OCA, polarizer films, thin plastics, etc.) are widely used in modern manufacturing — from smartphone displays to food packaging, thin films are indispensable.
Typical thin-film processing requirements: through-cutting, selective depth cutting, scribing, and perforating.
Core challenges: extremely thin materials, sensitivity to the heat-affected zone, the need for a consistent cutting depth, and high edge-quality requirements.
Advantages of a 30W CO2 Laser
For thin-film cutting, 30W is a “golden power point”: moderate power (enough to cut films without excessive heat impact), compact size for easy integration, cost-effective, and reliable enough for 24/7 continuous operation.
Why Is Power Stability Critical?
Thin films are extremely thin; power fluctuations lead to inconsistent cutting, higher scrap rates and lower production efficiency. The Synrad vi30+ guarantees cold-start stability within <5% and remains stable even at duty cycles as low as 10%.
The Importance of Beam Quality
M² describes beam quality; the closer the value is to 1, the better. The vi30+ guarantees M²<1.2, with a typical value of about 1.03, ensuring the smallest focused spot and a consistent cutting line width.
Thin-Film Cutting Process Essentials
| Film type | Recommended wavelength |
|---|---|
| PET | 9.3µm |
| OPP/CPP/PP | 10.2µm |
| General films | 10.6µm |
Avoiding Selection Pitfalls
Pitfall 1: looking only at peak power while ignoring power stability and cold-start performance.
Pitfall 2: different vendors use inconsistent calculation formulas, making their stability data look better.
Pitfall 3: ignoring beam quality — a laser with M²>2 cannot effectively cut fine films.
Conclusion
Key selection points for thin-film laser cutting: power stability is the core, beam quality matters (M²<1.2), pulse response must be fast, and the wavelength must match the material. The vi30+ was born for thin-film cutting and is an ideal choice for precision thin-film processing.



Leave a Reply