On May 18, the 21st “China Optics Valley” International Optoelectronic Exposition opened at the Wuhan Optics Valley Science and Technology Convention and Exhibition Center. Under the theme “Light Connects Everything, Intelligence Leads the Future” and centered on the “Light + AI” mainline, this year’s expo attracted nearly 400 exhibitors from home and abroad and collected more than 200 debut achievements. Among them, Raycus Laser’s 10.1kW near-fundamental-mode 10kW-class fiber laser set a world record with the world’s best beam quality of M²=1.13, becoming the brightest star product of the expo.
1. Raycus Laser: Conquering the “Raman Effect” with the World’s Best 10kW-Class Beam Quality
At the expo’s opening ceremony on May 18, Raycus Laser officially released its “LD direct-pumped near-fundamental-mode 10kW-class fiber laser”, listed as one of the 8 industry-milestone debut achievements.
Core Parameter Breakthroughs
- Output power: 10.1kW, achieving near-fundamental-mode output at the 10kW class for the first time
- Beam quality M²: 1.13, far better than the 3-4 of conventional industrial lasers and close to the physical diffraction limit
- Complete-machine cost: nearly 50% lower than the traditional “tandem pumping” scheme
- Core component cost: the semiconductor pump source fell from an imported CNY 200,000 per 1000W to CNY 2,000 per 1000W after localization, a drop of 99%
Yan Dapeng, National Outstanding Engineer and Vice Chairman and Chief Engineer of Raycus Laser, said the product is currently the only fiber laser in the world to achieve near-fundamental-mode output at the 10kW class, setting a world record for beam quality among fiber lasers of its class.
Technical Breakthrough: Circular Modified Fiber Solves the “Light Traffic Jam”
High-power fiber lasers have long been constrained by the “Raman effect” — light energy interferes with itself during transmission in the fiber, producing energy drift and buildup that limit power scaling and easily damage equipment. The traditional solution uses the octagonal fiber pioneered abroad, but power has never managed to break the single-mode 10kW barrier while preserving beam quality.
Raycus Laser took a different path, and after five years of research developed its circular modified fiber technology:
- Innovatively inserting four fluorine columns into the fiber to change the light transmission path, equivalent to laying a low-loss, high-efficiency “laser highway”
- Combined with wavelength-locked semiconductor direct pumping technology, solving the energy buildup problem at its root
- Replacing the complex “tandem pumping” with “direct pumping”, greatly simplifying the system structure
This core technology won the Second Prize of the National Science and Technology Progress Award in 2024 and successfully bypassed foreign patent blockades.
Application Prospects: From Aerospace to the Low-Altitude Economy
The near-fundamental-mode output of M²=1.13 brings a qualitative leap:
- Precision welding of new energy batteries: effectively suppresses spatter, raising the yield rate above 99.9%
- Aerospace 3D printing: high-precision welding repair of large, complex metal components
- Laser clearing of high-voltage power lines: replaces manual work at height and avoids climbing risks
- Low-altitude defense: the high-brightness characteristic enables precise long-range strikes on drones and other targets
Raycus Laser’s 2025 annual report shows sales of 10kW-and-above high-power lasers reached 8,561 units, up 26% YoY. Its domestic market share has reached 26.8%, overtaking international giant IPG to take first place.
2. The Expo’s 8 Milestone Achievements at a Glance
The expo’s opening ceremony featured 8 landmark innovations that are world firsts, Asian debuts, or nationally leading, spanning the full industry chain from basic materials and core components to system integration:
| Achievement | Company | Core breakthrough |
|---|---|---|
| 800G transoceanic ultra-high-capacity transmission system | FiberHome | China’s first stable transmission of an 800G signal over a 6,000 km submarine long-haul link |
| 12.8T XPO optical module | HGTECH | World’s highest-speed optical module, with a peak rate of 12.8 Tbps |
| LD direct-pumped near-fundamental-mode 10kW-class fiber laser | Raycus Laser | 10.1kW output and M²=1.13, the world’s best beam quality |
| 6.4T NPO | Accelink | A key leap for NPO technology from concept exploration to engineering application |
| SWLP 8μm infrared detector | Raytron | World-first SWLP packaging technology, breaking the core bottleneck of civilian infrared |
| TEC temperature-control chip | Lengxin Semiconductor (冷芯半导体) | Independent control of high-end temperature-control chips |
| Shortwave infrared camera-style beam profiler | Thorlabs | Fills the international technology gap in shortwave infrared fine beam profile analysis |
| New erbium-ytterbium co-doped fiber | Exail (France) | 30W output with over 700 h of stable operation, a new benchmark for 1.5μm lasers |
3. Dr Laser: World Debut of an 8-Inch SiC Ingot Laser Slicing Machine
Dr Laser released several heavyweight products at the expo, the most notable being the world’s first 8-inch silicon carbide (SiC) ingot laser slicing machine:
- Cutting loss: reduced from 150 μm with traditional wire sawing to below 20 μm, raising material utilization by more than 40%
- Cutting speed: up 3x, with per-wafer cutting cost down 60%
- Machining quality: no chipping or cracks, with surface roughness Ra <0.5 μm
- Application scenarios: suited to 6-12 inch SiC substrate manufacturing, with letters of intent already secured from leading domestic SiC companies
Dr Laser also exhibited the mass-production version of its panel-level TGV laser microvia equipment, with a minimum hole diameter ≤3 μm and an aspect ratio ≥120:1, and processing yield close to 100%; it is deeply involved in building TSMC’s CoPoS packaging pilot line. The company formally announced its “pan-semiconductor laser platform” strategy, focusing on three directions: photovoltaics, advanced semiconductor packaging, and third-generation semiconductors.
4. Industry Impact: Chinese Lasers Move from Following to Leading
The breakthrough of Raycus Laser’s 10.1kW near-fundamental-mode 10kW-class fiber laser is not only a technical milestone but also marks a profound shift in China’s laser industry landscape:
1. Breaking the technology monopoly: filling the international technology gap in single-mode 10kW-class fiber lasers, with a Chinese company leading in the high-power laser field for the first time.
2. Full-chain independence: from core materials (modified fiber) and key components (semiconductor pump sources) to complete lasers, Raycus has built a full chain of in-house R&D, production, and use, shedding dependence on imported components.
3. Cost reshapes the competitive landscape: core component cost fell from CNY 200,000 per 1000W to CNY 2,000 per 1000W, allowing high-power laser equipment to enter ordinary industrial scenarios at scale. According to industry reports, Chinese lasers of the same specification are exported to Europe at less than half the price of local products.
4. Rising industry concentration: industry resources are accelerating their flow to leading companies with in-house core component R&D capabilities, shifting from price competition to value competition.
Wuhan has set a goal of breaking CNY 1.5 trillion in optoelectronic information industry output by 2030. In 2025, the city’s optoelectronic information industry already exceeded CNY 850 billion, with more than 16,000 related companies. The world’s most complete industry and supply chain system — from core chips and key components to module equipment and system applications — is providing solid support for the laser industry’s continued breakthroughs.
Conclusion
From being “choked” on core technology to delivering the world’s best beam quality, Raycus Laser’s five-year effort not only forged an “affordable good blade” but also provided key equipment support for China’s high-end manufacturing in aerospace, new energy, 3D printing, and beyond. With the 8 milestone achievements of the Wuhan Optics Expo on concentrated display, China’s optoelectronic industry is moving from technology following to standard defining at an unprecedented pace of innovation. The push for large-scale equipment renewal will further drive the wide application of domestic high-end laser equipment across all sectors of the national economy.



Leave a Reply