In late October 2026, the laser industry again saw multiple major developments: China’s Hard X-ray Free-Electron Laser Facility achieved first lasing, a breakthrough for a landmark large science facility; meanwhile, domestic high-end laser light sources, water-guided lasers and metal additive manufacturing saw intensive investment and capacity landing. Below are the key points of this laser industry news cycle.
1. National Heavyweight: Hard X-ray Free-Electron Laser Facility (SHINE) Achieves First Lasing
On October 21, according to Xinhua News Agency and CCTV News, the national major science and technology infrastructure – the Hard X-ray Free-Electron Laser Facility (SHINE) – successfully achieved first lasing of free-electron laser light in Shanghai, a key step toward the goal of completion and operation by the end of 2027.
Construction of SHINE started in April 2018, led by ShanghaiTech University and jointly built by the Shanghai Advanced Research Institute of the Chinese Academy of Sciences and the Shanghai Institute of Optics and Fine Mechanics of the Chinese Academy of Sciences. In this lasing, the facility used an electron beam produced by a 4 GeV continuous-wave superconducting linear accelerator to drive 18 undulator lines, each 4 meters long with a 55 mm magnetic period. When fully completed, the accelerator electron energy will reach 8 GeV; the first two undulator lines can produce free-electron laser radiation with photon energy covering 0.2-15 keV, with pulse lengths as short as the femtosecond scale and a maximum repetition rate of 1 MHz.
If a traditional synchrotron light source can take static “molecular photos,” SHINE is like a “super camera” that can shoot “molecular movies” recording fast motion in the microscopic world. There are currently only two such high-repetition-rate hard X-ray free-electron laser facilities in the world; the other is the LCLS-II-HE being upgraded in the United States. In addition, SHINE will also build the world’s first experimental station based on a 100-petawatt (PW) ultra-intense ultrafast laser, realizing the combination of ultra-intense lasers and free-electron lasers.
2. International Frontier: World Record for Attosecond Hard X-Ray Pulse Intensity Broken
According to an October 20 report by Science and Technology Daily, scientists from the University of Tokyo, the German Electron Synchrotron research center (DESY) and other institutions used the European X-ray Free-Electron Laser facility (European XFEL) to create an extremely short and unprecedentedly intense hard X-ray flash, with a peak pulse intensity exceeding 10^20 W/cm² and a pulse duration of about 300 attoseconds, breaking the world record for attosecond hard X-ray pulse intensity. The results were published in the journal Optica.
This breakthrough means scientists can use attosecond X-rays to explore strong nonlinear interactions between X-rays and matter, and may be able to manipulate electron behavior in chemical reactions. The cross frontier of free-electron lasers and ultrafast lasers continues to expand the boundary of human understanding of the microscopic world.
3. Domestic High-End Light Source Efforts: All-Solid-State LPP-EUV Driver Light Source
On October 16-18, the 2026 Third International Conference on Laser Extreme Manufacturing and the First Multi-Material Additive Manufacturing Forum were held in Ningbo, Zhejiang. According to Zhonghui Laser (中辉激光), its R&D team shared research on 10 kW-class nanosecond laser key technologies at the conference, focusing on the all-solid-state LPP-EUV (laser-produced plasma extreme ultraviolet) driver light source. The EUV light source is the core component of EUV lithography machines, and efforts in this direction are of great significance for promoting the autonomy of high-end lithography light sources.
4. Industrial Investment Lands Intensively
1. Bright Laser Technologies signs East China manufacturing base, total investment of CNY 1 billion. On October 20, the East China manufacturing base project of Xi’an Bright Laser Technologies Co., Ltd. was signed in Taicang High-tech Zone, Suzhou, with a total investment of CNY 1 billion and about 104,000 square meters of plant construction; at full production, the expected annual output value is CNY 1 billion, mainly producing semiconductor-related heat exchange parts and a series of high-end additive manufacturing equipment. Bright Laser Technologies is a leading domestic company in metal additive manufacturing.
2. Watlaser completes Pre-A funding of tens of millions of yuan, accelerating water-guided laser industrialization. On October 20, Shanghai Lengchen Technology (Watlaser) announced the completion of a Pre-A funding round of tens of millions of yuan, jointly invested by Nanjing Venture Capital Group (南京市创投集团), Lyucheng (绿丞) and other institutions. The company focuses on the R&D, production and sales of water-guided laser equipment, insists on independent development of core software and core hardware, and its products are widely used in semiconductors, aerospace, medical, industrial manufacturing, research universities and other fields. Water-guided lasers use a high-pressure micro water jet as an optical “fiber” to guide the laser, with continuous cooling during processing and an extremely small heat-affected zone, and are regarded as one of the key technologies of next-generation precision machining.
3. Project of 1.5 million fiber lasers and optical modules per year signed and settled in Xuyi. According to Laser Headlines (激光头条), a project with an annual output of 1.5 million fiber lasers and optical modules recently signed to settle in Xuyi, Jiangsu. The investing company was founded by a professor team from a Project 985 university; its core technical team comes from the State Key Laboratory of Luminescent Materials and Devices and has been deeply engaged in single-frequency fiber laser materials and devices for more than two decades.
5. Talent and Ecosystem: Leading Companies Keep Investing
On October 21, Han’s Laser was named a 2026 “Shenzhen Green Factory,” reflecting its long-term investment in green intelligent manufacturing; Raycus Laser officially launched its “PhD 100” recruitment program, attracting high-end R&D talent globally and continuously strengthening technological innovation capabilities in fiber lasers; Gangchun Laser’s Linhai base officially began production, with its automated assembly lines mass-producing core modules of 10 kW-class AI laser cutting heads.
Industry Observations
This cycle’s developments show three main lines: “fundamental research breakthroughs + high-end light source autonomy + industrial investment landing.” The first lasing of a large science facility represented by SHINE not only raises China’s fundamental research and original innovation level, but also drives upstream technology demand for ultrafast lasers, precision optical components and ultra-intense ultrafast lasers; on the industry side, financing and capacity expansion appear intensively in niche tracks such as water-guided lasers, metal additive manufacturing and single-frequency fiber lasers, showing that capital is accelerating its concentration toward high-barrier directions such as precision machining of hard-to-machine materials. For laser device and optical component suppliers, grasping the localization of high-end light sources and the supporting demand from downstream scenarios such as advanced packaging and semiconductor manufacturing will be the key opportunity in the next stage.
(Information sources: Xinhua News Agency, CCTV News, China News Service, Science and Technology Daily, Suzhou Daily, Pedaily (投资界), Zhonghui Laser (中辉激光), Laser Headlines (激光头条))



Leave a Reply