Last updated: October 2026 | By Soar Laser
A CO₂ laser (carbon dioxide laser) is a gas molecular laser using a CO₂, N₂ and He gas mixture as its gain medium, emitting mid-infrared light at 9–11 μm via stimulated emission between vibrational-rotational levels of CO₂ molecules, typically at 10.6 μm. Thanks to excellent absorption by non-metals and a huge power range from 1 W to 20 kW, it remains irreplaceable for non-metal marking, cutting and PET coding. This article systematically covers the definition and working principle, pros and cons of seven types, common wavelengths and their uses, and a three-step selection method.
Key takeaways
- The mainstream CO₂ wavelength is 10.6 μm; 9.3 μm targets PET coding and dental hard-tissue processing.
- Classified by “excitation × cooling” into seven types: sealed glass tube, RF metal tube, slab, fast axial flow, transverse flow, slow axial flow (obsolete) and TEA (special pulsed case).
- Glass tube: lowest-cost marking workhorse, 10,000–15,000 hour life; RF metal tube: 35,000+ hours, first choice for high-end marking.
- Metal cutting mainstream has shifted to fibre lasers; CO₂ holds non-metal processing, the installed axial-flow cutting base and welding/cladding.
- Choose wavelength by the material’s FTIR absorption spectrum; wavelength and optics coatings are tied together — 10.6 μm and 9.3 μm lenses are not interchangeable.
What is a CO₂ laser? Definition and working principle
A CO₂ laser is a gas molecular laser using a CO₂, N₂ and He mixture as its gain medium, emitting mid-infrared light at 9–11 μm, typically 10.6 μm.
As described in Fundamentals of Laser Generation, CO₂ laser light also comes from stimulated emission — except the emitter is not an atom or ion but the vibrational-rotational levels of CO₂ molecules. CO₂ is a linear triatomic molecule with three vibration modes — symmetric stretch, bending and asymmetric stretch — of which the asymmetric stretch mode (00°1) is the upper laser level. The process has four steps:
- Discharge excitation: an electric field accelerates electrons that collide with and excite N₂ molecules to the first vibrational excited state (v=1);
- Energy transfer: N₂(v=1) is nearly resonant with the CO₂(00°1) level, so collisional energy transfer is extremely efficient, pumping large numbers of CO₂ molecules to the upper level;
- Stimulated emission: CO₂ transitions from 00°1 to lower levels, emitting a 10.6 μm (00°1→10°0) or 9.6 μm (00°1→02°0) photon;
- Role of He: helium atoms collide to empty the bending-vibration lower level (avoiding a “bottleneck”) and carry waste heat to the tube wall or heat exchanger — why diffusion-cooled tubes must contain helium, while some transverse-flow machines can use low-helium industrial gas.
A CO₂ photon has only about 1/10 the energy of a 1 μm fibre-laser photon, so material processing is essentially a thermal effect (vaporization, ablation, carbonization). Natural organic non-metals absorb 10.6 μm extremely well, while metal surfaces reflect over 95%, so CO₂ is called the “king of non-metal processing.”
CO₂ laser key parameters at a glance
| Item | Typical value |
|---|---|
| Active medium | CO₂:N₂:He ≈ 1:1:8 (sealed tubes also add traces of Xe and H₂ to suppress gas decomposition) |
| Output wavelength | 9–11 μm, commonly 10.6 μm (the P(20) line is about 10.59 μm) |
| Output power | 1 W – 20 kW |
| Electro-optic efficiency | 10–15% (about 1/2–1/3 that of fibre lasers) |
| Operating mode | Continuous (CW) / RF-modulated pulse / Q-switched pulse / TEA high-energy pulse |
| Beam mode | TEM₀₀ to higher-order multimode (depending on the machine) |
How many types of CO₂ laser are there? Pros and cons compared
The industry uses two classification dimensions: how the discharge is excited (DC / RF) and how heat is removed (diffusion cooling / gas-flow convection cooling). This yields the seven types below, of which the first five are today’s mainstream.
1. Sealed glass tube (DC excitation, diffusion cooling)
Bottom line: the lowest-cost non-metal marking workhorse, with limited life. The familiar three-layer water/air-cooled “glass laser tube,” 10–200 W (30/60/80/100/150 W most common). Advantages: extremely low cost (a few hundred to a thousand or two), easy tube replacement, ample supply; disadvantages: typical life only 10,000–15,000 hours (gas catalytic decomposition gradually lowers power), beam mode drifts with temperature and aging, glass is fragile, power cannot go very high. Typical uses: marking and engraving of acrylic, wood, leather, fabric, rubber and other non-metals.
2. RF metal tube (RF excitation, diffusion cooling)
Bottom line: a long-life, high-stability, maintenance-free solution, first choice for high-end marking. All-metal / metal-ceramic sealed construction, exemplified by Synrad and Coherent DIAMOND series, 10–600 W. Advantages: 35,000+ hour life, near-fundamental mode with long-term stability, instant on, RF high-speed modulation, plus a 9.3 μm variant dedicated to PET marking; disadvantages: expensive (tens of thousands), makers usually replace rather than repair, though third parties can refill “gas-depleted” declining tubes (about 30–60% of a new tube’s cost, adding years of life); full replacement is needed only for severe cavity/electrode/seal damage. Typical uses: high-end non-metal marking and cutting, inline food and pharma coding, precision thin-sheet processing (used in Universal, Trotec, Epilog machines).
3. Slab (RF excitation, diffusion cooling)
Bottom line: a compact mid-to-high-power solution with no gas-path maintenance. Two large electrode plates form a waveguide plus free-space hybrid mode, exemplified by the Rofin Slab DC series (now Coherent), 100 W–8 kW. Advantages: no blower or gas-path system, small size, good beam quality, relatively high electro-optic efficiency; disadvantages: high price, precision construction, the square hybrid mode needs a matched optical system. Typical use: once a mainstay of mid-to-high-power metal cutting (Bystronic and others), now mainly the installed-base maintenance market.
4. Fast axial flow, FAF (DC/RF excitation, fast convection cooling)
Bottom line: a good-beam-quality mid-power cutter with a huge installed base. A turbo blower drives gas along the optical axis at hundreds of metres per second, 1–8 kW, exemplified by the Trumpf TLF series. Advantages: high power, good beam quality (K≥0.7–0.9), excellent kerf quality, the mainstream metal cutter from 2000–2015; disadvantages: expensive, failure-prone turbo blower, heavy gas-path maintenance, large size, helium consumption, only about 10% electro-optic efficiency. Typical use: medium and thin plate metal cutting — many machines still run, with steady demand for output windows, 45° folding mirrors and ZnSe focusing lenses.
5. Transverse flow, TF (excitation direction, gas flow and optical axis mutually perpendicular)
Bottom line: the easiest to scale to 10 kW-class thermal processing. Blower plus heat exchanger circulates gas transversely for cooling, 2–20 kW. Advantages: easy to scale power, relatively simple structure, low cost, tolerant of gas purity (can use helium-free industrial gas); disadvantages: poor beam quality (high-order modes, large divergence), cannot do precision cutting. Typical uses: thick-plate welding, laser cladding and surface hardening — thermal processing insensitive to mode quality.
6. Slow axial flow, SAF (historical type)
Gas flows slowly along the axis; best beam quality but low power per unit length — a few hundred watts required several metres, superseded by fast axial flow and slab, essentially obsolete, seen only in some old machines and special precision models.
7. TEA CO₂ laser (special pulsed case)
Bottom line: a high-peak-power special case with joule-level single-pulse energy. Transverse atmospheric-pressure discharge, pulsed operation, single-pulse energy at the joule level, pulse width about a hundred nanoseconds, peak power in the megawatt range; low repetition rate (tens to hundreds of Hz), poor beam quality. Typical uses: high-peak-power ablation marking of glass, tires and packaging, laser rangefinding / LIDAR, research pumping.
Seven CO₂ laser types compared side by side
| Type | Excitation / cooling | Power range | Typical life | Beam quality | Cost | Main use |
|---|---|---|---|---|---|---|
| Sealed glass tube | DC / diffusion | 10–200 W | 10,000–15,000 hours | Medium (drifts with aging) | Very low | Non-metal marking and engraving |
| RF metal tube | RF / diffusion | 10–600 W | ≥35,000 hours | Excellent (near fundamental mode) | High | High-end marking, precision processing |
| Slab | RF / diffusion | 100 W–8 kW | Long | Good (hybrid mode) | High | Metal cutting (installed base) |
| Fast axial flow FAF | DC·RF / convection | 1–8 kW | Depends on blower maintenance | Excellent (K≥0.7) | Mid-high | Metal cutting (installed base) |
| Transverse flow TF | DC / convection | 2–20 kW | Long (simple structure) | Poor (high-order mode) | Medium | Welding, cladding, hardening |
| Slow axial flow SAF | DC / slow flow | ≤1 kW | — | Excellent | — | Essentially obsolete |
| TEA | Pulse discharge | Peak MW class | — | Poor | High | Ablation marking, rangefinding |
Common CO₂ laser wavelengths and their applications
The three vibration modes of CO₂ correspond to two main transition bands: the 10.4 μm band (00°1→10°0) and the 9.4 μm band (00°1→02°0), each splitting into dozens of P- and R-branch rovibrational lines. Therefore “CO₂ wavelength” is never a single point but a family of selectable lines:
| Wavelength | Line origin | Machine / maturity | Material absorption | Typical applications |
|---|---|---|---|---|
| 10.6 μm (10.59 μm, P(20) line) |
10.4 μm band P branch | Absolute mainstream; default wavelength for glass tubes, RF metal tubes and axial-flow | Natural non-metals (cellulose, leather, acrylic) absorb strongly; metal reflectivity >95% | Acrylic / wood / leather / fabric / paper / rubber cutting and marking; glass and ceramic marking; anodized-aluminium layer-removal marking; food cutting; aesthetic skin resurfacing |
| 9.3 μm | 9.4 μm band R branch (some machines use isotope gas mixes to boost gain) | RF metal tube specials (Synrad, Coherent, Universal etc.), pricier than 10.6 μm | PET and hydroxyapatite absorb far more strongly than at 10.6 μm (several times) | Inline high-speed coding of PET bottles / pharma bottles / blister packs; dental hard-tissue cutting (e.g. 9.3 μm dental laser); white-text marking on plastics |
| 9.4 / 9.6 μm | 9.4 μm band P branch | Line-tunable machines / specials | Some polymers and films absorb better | Polymer-film processing, research spectroscopy, differential absorption LIDAR (DIAL) |
| 10.2 / 10.25 μm | 10.4 μm band R branch | Line-tunable / custom machines | Some polymers match better | Specialty polymer processing, research |
| 9.2–11 μm line-tunable | Intracavity grating line selection, hundreds of lines | Research custom machines | Depends on the chosen line | Spectroscopy, atmospheric remote sensing, pumping far-infrared lasers |
How to determine which wavelength to use? Three practical methods
- Check the material’s FTIR absorption spectrum: the higher the absorption coefficient at the target wavelength, the faster the marking and the smaller the heat-affected zone. Natural organics (wood, leather, paper, fabric) generally absorb 10.6 μm well; PET-type polyesters choose 9.3 μm; inert plastics such as PE/PP that absorb weakly across 9–11 μm need a laser sensitizer or a wavelength change verified by testing.
- Wavelength and optical accessories are bound together: changing wavelength means changing a whole coating set — output couplers, ZnSe windows, focusing lenses and protective windows have anti-reflective / high-reflective coatings designed for a specific wavelength (see Optical Coatings Encyclopedia); 10.6 μm and 9.3 μm cannot be interchanged. This is why 9.3 μm machines and accessories cost more with longer lead times; the 10.6 μm ecosystem is the most complete and cheapest.
- Do not sell wavelength precision as a feature: a glass tube labelled “10.64 μm” and a metal tube labelled “10.6 μm” make no real difference (the P(20) line itself is near 10.59 μm); what determines the result is material absorption matching, not the second decimal place.
How to choose a CO₂ laser? Three-step selection
- Fix wavelength by material: 10.6 μm for general non-metals; 9.3 μm for PET packaging and dental; if unsure, do an FTIR absorption spectrum or send samples for a trial marking.
- Set power and beam quality by work area and speed: 30–100 W is enough for marking; for cutting, consider material thickness and area — choose near-fundamental mode (RF metal tube, slab) for fine kerfs, transverse flow when only a thermal effect is needed.
- Set type by budget and maintenance ecosystem: glass tubes have cheap consumables but need periodic replacement; RF metal tubes are expensive up front but maintenance-free for 35,000 hours; axial-flow machines need budget for turbo-blower maintenance and laser gas (with helium). Low-power CO₂ marking setups often include a beam expander and F-theta lens — confirm wavelength matching when selecting.
Three common myths about CO₂ lasers
- “The CO₂ wavelength is just 10.6 μm” — incomplete. 9.3 μm is a must in PET coding and dental markets and must be distinguished when selecting.
- “CO₂ can process all plastics” — the most common customer misconception. Polyolefins such as PE/PP absorb 9–11 μm very weakly, so direct marking is poor; a laser sensitizer or different approach is needed.
- “Wavelength can be switched anytime” — cavity line-selection elements and the whole coating chain are customized per wavelength and fixed at the factory; 10.6 μm and 9.3 μm optics cannot be mixed.
CO₂ laser FAQ
What is the difference between a CO₂ laser and a fibre laser?
Fibre lasers output near-infrared around 1 μm, absorbed well by metals, and dominate metal cutting and marking; CO₂ lasers output 10.6 μm mid-infrared, absorbed well by non-metals (acrylic, wood, leather, plastic film) but highly reflected by metals, focusing on non-metal processing. Electro-optic efficiency is about 30% and 10–15% respectively.
How to choose between CO₂ 9.3 μm and 10.6 μm?
Choose 10.6 μm for ordinary non-metal marking and cutting — the most complete accessory ecosystem and lowest cost; choose 9.3 μm for PET bottle coding, blister packaging and dental hard-tissue processing — PET and enamel absorb several times more, giving higher efficiency and less heat effect. Their coating sets are not interchangeable.
How long does a CO₂ laser tube typically last?
A sealed glass tube lasts about 10,000–15,000 hours with power slowly declining, but replacement is cheap; an RF metal tube lasts 35,000+ hours and is essentially maintenance-free but expensive as a whole. Life depends on cooling, duty cycle and the degree of gas catalytic decomposition.
Which materials can a CO₂ laser mark?
Acrylic, wood, bamboo, paper, leather, fabric, rubber, glass, ceramics, anodized aluminium and most engineering plastics; polyolefins such as PE/PP absorb 9–11 μm weakly and need a laser sensitizer or test verification; bare metal is generally unsuitable.
Can a CO₂ laser cut metal?
At 10.6 μm metal reflectivity exceeds 95%, so continuous CO₂ cutting of metal is inefficient and metal cutting has shifted to fibre lasers; CO₂ remains in thermal processing such as thick-plate welding and cladding (transverse-flow machines) and the large installed base of fast-axial-flow and slab cutters.
What routine maintenance does a CO₂ laser need?
For glass-tube machines, watch chiller water level and temperature (18–25 °C), lens cleaning and tube aging; RF metal tubes need no gas-path maintenance, focus on maintaining the beam expander, focusing lens and protective window; axial-flow machines need periodic laser-gas replacement and turbo-blower and gas-circuits upkeep.
Are 10.6 μm and 9.3 μm optical lenses interchangeable?
No. Output windows, ZnSe focusing lenses, protective windows and high-reflective coatings are customized for the working wavelength; mixing 10.6 μm and 9.3 μm lenses greatly increases reflection loss or even burns the coating; changing wavelength requires replacing the whole optical chain, including the laser protective window.
Related accessories and further reading
Soar Laser supplies full-chain optical accessories for CO₂ marking and cutting machines: ZnSe focusing lenses, output windows, 45° folding mirrors, protective windows and F-theta lenses, with 10.6 μm and 9.3 μm coatings custom-made. For more system knowledge, see:
- Laser Principles Encyclopedia: Stimulated Emission and Laser Structure
- Laser Marking and Engraving Applications Encyclopedia
- F-theta Lens Encyclopedia and Selection Guide
- Laser Focusing Lens Encyclopedia
- Optical Coatings Encyclopedia: Wavelength-Customized Coatings
- Laser Encyclopedia Index (164 articles)
References: RP Photonics Encyclopedia: CO₂ Lasers (rp-photonics.com); Synrad / Coherent CO₂ laser official datasheets (synrad.com); IEC 60825 laser product safety standard (iec.ch).



Leave a Reply